Zoom

75 Gallon - 70,000 BTU Conservationist Power Direct Vent Commercial Gas Water Heater

SKU:BPD-75

Brand: AO Smith

75 Gallon - 70,000 BTU Conservationist Power Direct Vent Commercial Gas Water Heater
Qty	Price
	$2,542.95 / each

In Stock! Ships in 24-48 Hours

1 Available

Specs

Product Specs
Fuel Type:	Natural Gas (NG)
Application:	Plumbing
Capacity:	75 Gallon
BTU Input:	70000
Efficiency: ? Efficiency close Efficiency refers to how much waste a process creates. Higher efficiency produces less waste.	80%
Max PSI: ? Max PSI close Max PSI is the maximum amount of pressure per square inch that can be tolerated.	150 psi
Vent Size:	3"
Vent Type:	ABS
	CPVC
	PVC
Height:	69-5/8"
Diameter: ? Diameter close Diameter is a measure from one side of a circle straight through to the other.	26"
Weight:	352 lbs
Gas Connection:	1/2"
Water Connection:	3/4"
ASME:	No
Recovery 40°F Rise:	161 gal/hr
Recovery 100°F Rise:	64 gal/hr
Recovery 140°F Rise:	146 gal/hr
Warranty:	3 Yr Limited Tank

Description for AO Smith BPD-75

The BPD-75 tank-type commercial gas water heater is intended for light-duty applications such as small office buildings and duplex apartment homes. The BPD-75 features a power direct vent design, with a factory-installed blower. The blower permits sealed combustion direct-vent operation, with separate venting and air intake runs from outside the structure. The BPD-75 offers installation versatility by allowing venting and intake runs up to 50 feet, using 3" Schedule 40 PVC pipe. The power direct-vent design also eliminates the potential for performance and safety problems caused by negative air pressure, a problem found in many commercial applications with inadequate indoor ventilation.

Features:

Dynaclean II automatic sediment-cleaning system -specially designed dip tube directs incoming cold water to create turbulence in the tank to reduce lime and sediment buildup, prolongs tank life, maintains high energy-efficiency, maximizes hot water output
Permaglas glass-lined tank - glass lining and anode rod protect steel tank from corrosion
Quiet modular blower - built-in safety device prevents pilot or main burner operation if blower is not operating, blower has 110/120V electrical system, with maximum 2-amp draw
Durable brass drain valve - factory-installed
CSA certified and ASME rated T&P relief valve

NOTE: May require the use of a lift gate. Please note the product weight listed in the specs