Your new password is on its way. If you have problems accessing your account, please contact us at 1-888-757-4774 and we'll help you out.
I'm sorry, your e-mail was not found in our system.
If you think this is a mistake, please contact customer service at 1-888-757-4774 or via e-mail here.
You will have the option to create an account on the order confirmation page.
This category contains Amtrol BoilerMate Indirect-Fired Water Heaters, including the Champion, Classic & Premier Series.
The Classic Series is the indirect water heater that started it all . With three decades of proven performance and reliability, the Classic Series remains the industry standard.
The Champion Series BoilerMate is the latest addition to Amtrol's extensive lineup. With an efficient heat exchanger, simplified connections and clean design, the Champion Series is the best value in the market.
The Premier Series BoilerMate features 316-L stainless steel construction and less than 1/2°F heat loss per hour. The Premier Series indirect water heater is an excellent choice for large homes and high demands.
…
This category contains Amtrol WELL-X-TROL stand well tanks, available in 10.3-119 gallon tank sizes. …
Combining all the major components of a well tank installation, the Well-X1 comes pre-assembled, tested and ready to run. The Well-X1 includes a state-of-the-art digital pump control with pump protection and diagnostic features, pre-stripped wire connections and integrated wiring box, complete plumbing tee assembly, pressure relief valve and a factory installed bottom drain.
In addition to its plug-and-play design, the Well-X1 can also be set at a narrow pressure differential, allowing it to provide constant pressure with any new or existing pump. With traditional wiring and no complicated programming, The Well-X1 is your constant pressure solution for 2-wire pump systems. It is perfect for upgrading submersible and jet pumps to city-like water pressure.
…
The AMTROL FILL-TROL® system consists of a specially adapted EXTROL® pre-pressurized, diaphragm-type expansion tank, and the FILL-TROL, a specially designed, automatic, fill valve. …
Well-X-Trol Underground tanks are designed with a special finish that resists corrosion in buried installations. A high-build epoxy primer guards against moisture, stray current and acidic soil conditions that can damage a standard well tank. …
Radiant Extrol tanks are specifically designed for high-efficiency radiant systems. They come with a plastic liner compatible with barrier and non-barrier systems. The radiant Extrol tanks are suitable for use in glycol applications and offer a non-ferrous system connection for corrosion resistance. The maximum working pressure is 100 psig and the maximum operating temperature 200°F. …
Well-X-Trol Pro Access tanks utilize a full stainless steel waterway with the piping extended to the stand opening. The female connection includes wrench flats for extra control when tightening. …
WELL-X-TROL ASME water tanks continue to set industry standards for quality and reliability and have been performance-proven in a variety of applications ranging from municipal well systems or pressure boosting stations to sprinkler systems at your local golf course. A few examples are listed below: <ul><li>In a municipal well system or pressure boosting station, WELL-X-TROLs are used to control sequential start of the main pumps. At the same time, it reduces surge and provides the jockey pump with guaranteed minimum run times during the peak demand periods.</li> <li>High-pressure booster applications in high-rise buildings, irrigation systems and community wells are ideally suited for the WELL-X-TROL 400 Series. The 450 Series can be used on pressure regulation stations to provide dampening during periodic high peak loading.</li> <li>Many times, two model WELL-X-TROLs can be used together on the same system. For example, on a golf course sprinkler system, a larger 450 Series protects and assures proper pump operation while a smaller 400 Series protects "dead end" lines from hammer and surge.</li> </ul> …
This category contains Amtrol pump stand and space saver tanks.
This category contains Amtrol WELL-X-TROL In-Line well tanks, available in 2-14 gallon tank sizes. …
Extrol Tanks are designed for closed loop hydronic heating systems. These tanks are manufactured by Amtrol. Amtrol is a respected name in the hydronic heating industry. These Extrol tanks may accompany a hydronic heating system. The Extrol tanks come in #15, #30, #60, and #90, the larger numbers have larger capacity. The SX models have greater capacity then the standard Extrol models and get larger with increasing numbers. …
Therm-X-Trol Tanks are designed for use in potable water systems and open loop heating systems. They are manufactured by Amtrol. …
There is a Minimum Advertised Price (MAP) allowed by the manufacturer on this product. Add item to cart for lowest price.
1 - 12 of 8
AMTROL revolutionized the hydronic industry in 1954 when they introduced Extrol, the world's first pre-pressurized diaphragm expansion tank. Since then, Amtrol has been the world leader in the design and operation of the vital mechanical systems that are used to control hydronic heating and to store potable water.
At PexSupply.com, our goal is to bring you the highest quality plumbing, heating and HVAC supplies at competitive prices. Our product catalog includes PEX Plumbing Supplies, Radiant Heat Supplies, VisionPro Honeywell Thermostats, Taco pumps and mini-split air conditioners. If there are items you are looking for but can't find on our website, please contact our Customer Service Representatives & we will do our best to find what you need.
© 2012 PexSupply.com





