Kick Space Heater Hose Kit for K42, K84 or K120 Zoom

Kick Space Heater Hose Kit for K42, K84 or K120

SKU:HK-10

Brand: Beacon Morris

Beacon Morris
Qty Price
$56.25
/ each
$215.80 / box (4 units x $53.95)
In Stock! Ships in 24-48 Hours
43 Available

Specs

Type: Hose Kit
Accessory For: K42
K84
K120
Application: Accessory
Length: 10 Ft Hose
Connection Size: 1/2"
Pipe Size: 1/2"

Description for Beacon Morris HK-10

The Twin-FloIII "Easy Connect" flexible hose connection kit allows for easy installation of any 'K' Beacon/Morris Kick Space heater in new or retro-fit construction situation.
This kit includes the following items:

  • (2) +" (nominal) female bronze barbed hose cnnections
  • (2) +" (nominal) male bronze barbed hose connections
  • (4) Constant tension hose clamps
  • (1) 10 ft length of +" flexible hose
Additional Information:

Kick Space Heater Hose Kit for K42, K84 or K120

REVIEW SNAPSHOT®

by PowerReviews
Beacon MorrisKick Space Heater Hose Kit for K42, K84 or K120
 
4.4

(based on 5 reviews)

Ratings Distribution

  • 5 Stars

     

    (3)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

80%

of respondents would recommend this to a friend.

Reviewed by 5 customers

Sort by

Displaying reviews 1-5

Back to top

4/23/2012
 
5.0

high quality product

By pat

from Springfield IL

Verified Buyer

Pros

    Cons

      Best Uses

        Comments about Kick Space Heater Hose Kit for K42, K84 or K120:

        Looked at big box store, then bought B-M kit for ease of mind.

        • Primary use:
        • Personal

        Bottom Line Yes, I would recommend this to a friend

        Was this review helpful? Yes / No

         - You may also flag this review

        5/27/2011
         
        4.0

        Fine Kickspace Heater

        By Hydronic Heating customer

        from Colorado

        Verified Buyer

        Pros

          Cons

            Best Uses

              Comments about Kick Space Heater Hose Kit for K42, K84 or K120:

              Install was done by HVAC pro but easy to do.
              Be sure to get a diverter tee since those are not so easy to find in your local hardware or big box store.

              • Primary use:
              • Personal

              Bottom Line Yes, I would recommend this to a friend

              Was this review helpful? Yes / No

               - You may also flag this review

              11/15/2010
               
              5.0

              A must for installations in tight spots

              By FHdogs

              from S. VT.

              Verified Reviewer

              Comments about Kick Space Heater Hose Kit for K42, K84 or K120:

              This hose kit is a must have for any kickspace heater in tight quarts. Since the majority of these heater are installed under cabinets, or in stair risers, this kit will make intallation and service much easier.

              The very heavy duty hose will give you the ability to make your connections, and then slide the heater into place. Unless you have easy access to the rear of the heater, I would not recommend skipping this kit when installing a kickspace unit!

              Bottom Line Yes, I would recommend this to a friend

              Was this review helpful? Yes / No

               - You may also flag this review

              10/29/2010
               
              3.0

              hose kit

              By tinknr28[@]

              from Holtsville Newyork

              Verified Reviewer

              Comments about Kick Space Heater Hose Kit for K42, K84 or K120:

              good kit but a little high priced

              Bottom Line No, I would not recommend this to a friend

              Was this review helpful? Yes / No

               - You may also flag this review

              8/15/2010
               
              5.0

              Makes a tough job much simpler.

              By Rob K

              from Massachusetts

              Verified Buyer

              Comments about Kick Space Heater Hose Kit for K42, K84 or K120:

              I bought this product to re-connect my existing kickspace heater after rebuilding my kitchen cabinets. It came with everything I needed to hook into my existing piping. The hose was plenty long enough as I had to cut a couple feet off it. The hose is nice and heavy duty, and I'm very comfortable having it under my cabinets.

              Bottom Line Yes, I would recommend this to a friend

              Was this review helpful? Yes / No

               - You may also flag this review

              Displaying reviews 1-5

              Back to top

              Q&A: Ask the Questions, share answers

              Do you have questions about this product?

              get answers from real customers and in-house experts with AnswerBox.

              6 Questions | 15 Answers
              Displaying questions 1-6
              • Kick Space Heater Hose Kit for K42, K84 or K120

                Q:

                Is the hose Onix Tubing
                Asked on 4/20/2012 by None from Western PA

                2 answers

                • VERIFIED BUYER

                  A:

                  The hoses are rubber hosesthat can be cut to fit.
                  Connected by DROID on Verizon Wireless

                  Answered on 4/20/2012 by Another PexSupply Customer

                • VERIFIED BUYER

                  A:

                  As I recall ... it was a reinforced rubber, like a radiator hose.

                  Answered on 4/20/2012 by Another PexSupply Customer
              • Kick Space Heater Hose Kit for K42, K84 or K120

                Q:

                Is the purpose of this hose to allow flexiblity and to be able to pull the heater out from is location should it break where as it would be in a fixed location if copper piping was used??
                Asked on 3/7/2012 by james from canton ma

                9 answers

                • VERIFIED BUYER

                  A:

                  To put it simply... yes.This kit is useful if you are retrofitting underneath an existing cabinetry (as you will have difficulty soldering it in place)I used it however to place the toe kick heater in it's place and built the cabinetry over it; I could have soldered mine in place no problem (but as you said, then there will be no way to access it if you do want to latter pull it out).I did however find the price of this kit extremely high. You might be better off buying a car rad house and the reducer connections from a hardware store.

                  Answered on 3/8/2012 by Another PexSupply Customer

                • VERIFIED BUYER

                  A:

                  I used the hose because the heater was mounted in the floor and it was a little tight for soldering.
                   
                  .

                  Answered on 3/8/2012 by Another PexSupply Customer

                • VERIFIED BUYER

                  A:

                  Yes, the hose allows for a flexible connection. If installed under a base
                  cabinet it would be difficult to solder or unsolder a solid copper
                  connection. If the heater fails, the hose clamps allow for easy
                  disconnection and reinstallation. If your situation permits, you might want
                  to consider shut off valves on both sides of the supply to assist in
                  replacement of the heater.

                  Answered on 3/7/2012 by Another PexSupply Customer

                • VERIFIED BUYER

                  A:

                  I did not use the hose,but yes I did buy it, I hooked direct with the pex pipe using those new reuseable connectors. As long as you can get your hand to the connectors you can release to get your unit out. The unit works great.

                  Answered on 3/7/2012 by Another PexSupply Customer

                • VERIFIED BUYER

                  A:

                  The hose kit is so you can pull the unit out for repair, it's more likely
                  you will want to pull the unit out for cleaning. Being on the floor, it will
                  pull dust and debris thru the unit. The hose kit does make it easier to
                  install as well.

                  Answered on 3/7/2012 by Another PexSupply Customer

                • VERIFIED BUYER

                  A:

                  Yes, it is needed for service, i.e. failures, maintenance of coil cleaning
                  and motor repairs. Unless a service access is made above inside the
                  cabinetry, large enough for opening 2 unions after shutoff valves, which
                  gets more involved. But if it's a home owner who is willing to go to greater
                  lengths... The temperature of the heat source may be igniting concerns,
                  domestic water ( if used as a source) should top out 120-130 degrees, but if
                  it is a boiler in a northern climate where extended run times will cause it
                  see 170-180 degrees may cause flexible hose specs to be reviewed. Good luck.

                  Answered on 3/7/2012 by Another PexSupply Customer

                • VERIFIED BUYER

                  A:

                  Hi,
                  If you have access ... copper would be fine.
                  It was easier to install with the hoses, though. I also think that it isolates a little of the vibration and makes it easier to do the recommended periodic cleaning of the fan.

                  Answered on 3/7/2012 by Another PexSupply Customer

                • VERIFIED BUYER

                  A:

                  Hi,
                  I had an installed kick space heater that was copper connected and it failed. Since the water input and output of this heater did not match the new one, the flexible hose kit let me simply install the new heater without major plumbing issues. This setup also allows the heater to be positioned exactly where you want it and yes, there is some mobility in the new installed unit that was not there in the old one.
                  Roland DuBois

                  Answered on 3/7/2012 by Another PexSupply Customer

                • CUSTOMER CARE

                  A:

                  This hose is designed to make installation easier in tight spaces where it may be difficult to install rigid copper.

                  Answered on 3/7/2012 by PexSupply Staff from NY
              • Kick Space Heater Hose Kit for K42, K84 or K120

                Q:

                Are the hose and connectors strong enough for the presure of a hot water boiler such as a Crown model. I want use this kit with the k84 kickspace heater which will replace a cast iron radiator in a kitchen remodel.
                Asked on 11/10/2011 by Anonymous

                1 answer

                • CUSTOMER CARE

                  A:

                  Yes, the Beacon Morris hose kit will work with a residential hot water boiler system.

                  Answered on 11/10/2011 by PexSupply Staff from NY
              • Kick Space Heater Hose Kit for K42, K84 or K120

                Q:

                Will this work on the Slant/Fin modle as well?
                Asked on 9/25/2011 by Andy from VT

                1 answer

                • CUSTOMER CARE

                  A:

                  We don't see why it wouldn't.

                  Answered on 9/27/2011 by PexSupply Staff from NY
              • Kick Space Heater Hose Kit for K42, K84 or K120

                Q:

                Do I need this hose kit to connect the K120 to existing 3/4" fhw system
                Asked on 8/19/2011 by Anonymous

                1 answer

                • CUSTOMER CARE

                  A:

                  No, you can also use copper or PEX. This hose is designed for tight and hard-to-reach areas.

                  Answered on 8/19/2011 by PexSupply Staff from NY
              • Kick Space Heater Hose Kit for K42, K84 or K120

                Q:

                Does this hose have an oxygen barrier?
                Asked on 3/11/2011 by Anonymous

                1 answer

                • CUSTOMER CARE

                  A:

                  Yes, it does.

                  Answered on 3/14/2011 by PexSupply Staff from NY
              Displaying questions 1-6

              Do you have a question about this product? 

              Free Shipping on orders over $300

              You May Also Want

              PexSupply.com Logo

              Join Our Mailing List - Sign up and receive special offers and coupons

              Nextag Seller PriceGrabber User Ratings for Pex Supply PHCC BBB Reliability Seal
              HACKER SAFE certified sites prevent over 99.9% of hacker crime. Facebook Twitter Youtube