Zoom

K84 Kick Space Heater

SKU:K84

Brand: Beacon Morris

K84 Kick Space Heater
Qty	Price
	$177.95 / each
	$517.47 / box (3 units x $172.49)

In Stock! Ships in 24-48 Hours

174 Available

Specs

Product Specs
BTU: ? BTU close BTU stands for British Thermal Units and is used to describe heat output. One BTU is enough heat to raise one pound of water by one degree.	3370-10360 btu/hr
Width:	19-1/4"
Height:	3-7/8"
Flow Rate: ? Flow Rate close Flow rate describes the speed in which an amount of fluid can pass through.	1-3GPM
Model:	K84
Application:	Heating
Depth:	12-3/4"
Type:	Kickspace Heaters
Water Connection:	1/2"
Thread Size:	1/2"IDFitting

Description for Beacon Morris K84

Kickspace heaters are the space-saving alternative to hot water baseboard. Designed to fit inconspicuously under a cabinet, in the floor, on or in the wall, kickspace heaters are ideal for hard to heat areas such as foyers, kitchens, and bathrooms.
Hot water from the home's boiler is circulated through the kickspace unit and the fan gently blows heated air into the room. The homeowner simply selects the fan speed, then the unit turns on and off automatically according to heating demand.
Twin-Flo III + kickspace heaters are your ideal solution wherever space is limited:

Under Cabinets

In Kitchens, Baths, and Foyers

Under Stair Risers and Windows

K84 Kick Space Heater

REVIEW SNAPSHOT®

by PowerReviews

Beacon Morris K84 Kick Space Heater

4.6

(based on 19 reviews)

95%

of respondents would recommend this to a friend.

Pros

Cons

Best Uses

- Primary use:
- Personal (11)

Most Liked Positive Review

Small and powerful. Super Quiet!

Got this product because new kitchen cabinets did not allow for use of baseboard heating. This heater fits perfectly underneath my sink cabinet. Make sure you cut the floor panel and have access to it from the inside the cabinet to service if needed. Other than that, it so slim that it allowed me to leave the cut out floor right where it is making the storage underneath this cabinet available as designed during original kitchen build. Highly recommend, super quiet and packs a punch with over 9000 BTU if your hot water supply around 175+ F.

Most Liked Negative Review

Good as a last resort

The K84 unit will fit best in a cabinet that is 30" wide or larger. The face plate is a little flimsy, so be carefull not to place it where it might get k...Read complete review

The K84 unit will fit best in a cabinet that is 30" wide or larger. The face plate is a little flimsy, so be carefull not to place it where it might get kicked repeatedly. Make sure you are willing to cut out the bottom of the inside cabinet and install a false bottom or you will not be able to service the unit. This is especially true if you have to bleed the system for air.

Reviewed by 19 customers

Sort by

Displaying reviews 1-10

Previous | Next »

3/8/2012

5.0

Works as Advertised

By Cheezaley

from Metro West

Pros

Cons

Best Uses

Comments about Beacon Morris K84 Kick Space Heater:

I installed on a Saturday afternoon and woks very well. Most difficult part was purging all the air from the system once install was complete.

3/2/2012

5.0

Heat Source

By J.A.B.

from Pittsburgh, PA

Pros

Cons

Best Uses

Comments about Beacon Morris K84 Kick Space Heater:

After having a 'Beacon Morris' K42 in use for over 35 years, it was a no-brainer when it became time for a replacement. Not only did we replace the still operational K42, we added the larger K84 at the further end of the kitchen. Both units are well made and have improvements over the old model. The three way switch is a nice feature, and the units running on low speed are quieter than the old unit, in fact, the only indication of operation is the warm air provided thru the kick base grills. "PexSupply" provided the products I wanted quickly, and at a good price.

1/30/2012

5.0

Works Well

By Dan

from Jackson, Mi

Pros

Cons

Best Uses

Comments about Beacon Morris K84 Kick Space Heater:

Used this to add heat to an underheated family room.

Were foutunate to have space at the end of an existing heat run to mount unit. Surface mounted unit using the available wall cabinet. When the fan is on HI, it's a little noisey but low speed is quiet, and moves enough air. I wish I had known about this product long ago.

Recommended:
F84 Wall Cabinet

1/27/2012

5.0

Excellent Product

By Dave

from New Holland, PA

Pros

Cons

Best Uses

Comments about Beacon Morris K84 Kick Space Heater:

Throws off a lot of heat for a small area between island counter and main counters.. Very quiet on low fan speed.

11/14/2011

5.0

Works Great!

By Mark

from Rehoboth, MA

Pros

Cons

Best Uses

Comments about Beacon Morris K84 Kick Space Heater:

I have a good size master bath and was it was the coldest room in the house. The existing baseboard heat was inadequate. We've had some cold nights already this year and needed to turn the heat on. With the new K84 installed, our MB is one of the warmest rooms in the house. The wife loves it.

10/3/2011

5.0

Great

By Brett

from Southern NH

Pros

Cons

Best Uses

Comments about Beacon Morris K84 Kick Space Heater:

Using Pex heating tube, and shark bite connectors taking out a 10 foot piece of baseboard and replacing with this was easy, even for someone who is not handy. Only problem I ran into was the aquastat came off the pipe inside the electric. Just had to slide it back on.

9/5/2011

5.0

Well made product

By marstonpw

from Massachusetts

Pros

Cons

Best Uses

Comments about Beacon Morris K84 Kick Space Heater:

Installed this unit to replace a 25 year old similar model. This new unit is almost totally silent when running and appears well made. Pex Supply is also a value leader in pricing. I would suggest making your own connection kit as opposed to buying the supplier kit. I purchased 6 feet of 5/8 ID heater hose and 4 clamps at the local auto parts store for under $10 which allowed me to connect up to hard copper plumbing feed/return, while providing moveable placement of the unit.

6/15/2011

5.0

Very user friendly

By RPM

from Lake Orion,Michigan

Pros

Cons

Best Uses

Comments about Beacon Morris K84 Kick Space Heater:

I'm in the construction business and found out that this type of heater is a great alternative when baseboard heating is involved. There easily installed ,like the two speed fan option and very quiet even on high setting and no one knows their there. I recommend this product very highly even to doit yourselfers.

4/18/2011

4.0

Client is happy - what else matters

By pablo

from Kensington MD

Pros

Cons

Best Uses

Comments about Beacon Morris K84 Kick Space Heater:

These are a great alternative to radiators, or baseboard heat. My client is very happy. High fan setting is a bit noisy but low fan is fine

4/12/2011

5.0

Small and powerful. Super Quiet!

By Roman

from Pomona, NY

Pros

Cons

Best Uses

Comments about Beacon Morris K84 Kick Space Heater:

Displaying reviews 1-10

Previous | Next »

Q&A: Ask the Questions, share answers

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

13 Questions | 28 Answers

Displaying questions 1-10Previous | Next »

Beacon Morris K84 Kick Space Heater
Q:
Do I also need to buy Kick Space Heater Hose Kit when I buy K42 or K84?
Asked on 3/26/2012 by Dennis
Know the answer? Answer this question
9 answers
- VERIFIED BUYER
  
  A:
  You do not have to buy the Hose Kit. I f you have the room to work and sweat the copper, you can run all the way. If you do not have the space to work, then I would recommend the Hose Kit.
  "Do I also need to buy Kick Space Heater Hose Kit when I buy K42 or K84?"
  Answered on 3/27/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  You can either buy the hose kit or pipe directly to the heater.
  Answered on 3/27/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  You don't always need that, it depends on your installation type. If you
  sweat both inlet and outlet to your main hot water loop directly with hard
  copper, you won't need it at all. However, if the hard copper
  connecting pipes you use are long straight runs, expansion/contraction
  might be an issue. The hose allows you some fexibility. You can buy the
  hose kit or buy the same fittings and some hose at a plumbing supply store
  or home center for a little less cost. I had some good high temp. hose
  so I bought the four hose-to-pipe fittings at Lowes, sweated them on and
  used hose clamps. That basically mimics the kit and works fine. Using
  hose allows a slightly easier removal if I ever have to replace it. The
  kit is probably not a bad way to go.
  You will see that you need a restrictor of some kind in the main loop to
  deflect some of the hot water from the main loop into the kick-space
  heater. I couldn't find the fitting they described so I used a ball valve
  that I keep half open and everything works fine. Good luck. Mine has been
  runing for two winters with no issues.
  Answered on 3/27/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  Yes, the hose kit makes installation much easier. If you don't buy the
  hose kit you will have to shop elsewhere for the hose and fittings.
  Answered on 3/26/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  I have installed a couple of these using copper fittings and tubing. A hose kit might be easier but either way will work.
  Answered on 3/26/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  Not necessarily. The hose kit is an optional item that allows you to make your connections using flexible hose as opposed to hard copper or PEX connections. Depending on your installation (how much room or access you have) the kit can make it easier to install the heater. My company has installed a fair number without the hose kit, but at least a couple would have been easier with it (if we'd known about it at the time). If the piping connections are difficult to access when the heater is in position, having flexible connections can allow you to connect to the piping first, then to the heater and then put the heater into place. Also, if the heater is accessible now but won't be later (it's being installed and a cabinet then installed over it) the hose kit can make any servicing required later a lot easier. If the unit is going into the toe kick of a cabinet and an access panel can be in the bottom of it large enough to expose everything, then the kit shouldn't be needed. But if the access can only expose the heater itself and not the piping, the hose is pretty handy.
  Ultimately, it really depends on the details of your installation. The unit will work with or without it and you have to decide whether your specific installation will be better one way or the other.
  One other thing, if you are tying this to an existing radiant circuit that uses diverter tees (sometimes called monoflo tees among other things) make sure you have a vent or purge fitting on the heater. If not, your heater may very well end up air-locked and won't circulate. If it's on its own pipe circuit or in a series circuit, that's probably not going to be a problem.
  Good luck!
  Answered on 3/26/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  You don't need to buy the hose but it doesn't hurt depending on how you
  mount it. I used it so I could easily detach the kickspace if I space if I
  ever needed to. Otherwise if you sweat 1/2" copper all the way to the unit
  you have to cut the pipe to remove. I also like that is serves as another
  shock/vibration isolation ism.
  Answered on 3/26/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  I would recommend buying the hose kit, then you can pull the unit out for
  cleaning. It also aids in the installation .
  Answered on 3/26/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  I didn't buy anything but ths in my purchase. You just solder the
  1/2" copper line directly to the radiator in the unit just like any other
  radiator install. Hope this helps.
  Answered on 3/26/2012 by Another PexSupply Customer
Beacon Morris K84 Kick Space Heater
Q:
Can these units be used with potable water? I would like to put it on the return line of my potable recirculation loop for supplemental heat in a bathroom.
Asked on 3/2/2012 by Anonymous
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  Beacon Morris Twin-Flo III Heaters should be connected only to circulating hot water systems where at least 1 gpm water ﬂow is expected. They will work on one or two pipe systems, or in a series loop where pressure and temperature drop can be tolerated (see the installation manual for further details).
  Answered on 3/29/2012 by PexSupply Staff from NY
Beacon Morris K84 Kick Space Heater
Q:
MY KITCHEN IS 11' X 19' AND WELL INSULATED WITH AN OPEN WALL TO THE DINING ROOM. WHAT SIZE UNIT SHOULD I USE?
Asked on 1/29/2012 by Anonymous from DANBURY, CT
Know the answer? Answer this question
2 answers
- CUSTOMER CARE
  
  A:
  A K42 may be sufficient depending on the amount of heat coming from the dining room and your water temperatures, but a K84 would likely be the safer choice. Keep in mind also that kitchen appliances give off heat.
  Answered on 1/30/2012 by PexSupply Staff from NY
- VERIFIED BUYER
  
  A:
  I'm not a professional, but I think that the 84 would be plenty, maybe too much. I was told that the 84 was like adding 30' of baseboard.
  Answered on 1/30/2012 by Dan from Jackson, Mi
Beacon Morris K84 Kick Space Heater
Q:
Looking for a replacement blower and motor for the twin flow III K-84 "01" vintage.

Thanks
Dennis
Asked on 11/16/2011 by Anonymous from Billings, MT
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  The replacement blower motor assembly is BMKR02020-002.
  Answered on 11/16/2011 by PexSupply Staff from NY
Beacon Morris K84 Kick Space Heater
Q:
When installed under a Kitchen Cabinet can you tell me how warm the inside of the cabinet would get. We are concerned about storing food if the temperature gets to hot.
Asked on 10/13/2011 by Nick from Ivyland, pa
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  This would depend on the temperature of the water being fed to the unit.
  Answered on 10/14/2011 by PexSupply Staff from NY
Beacon Morris K84 Kick Space Heater
Q:
how do you clean it
Asked on 9/7/2011 by Anonymous from fairbanks alaska
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  The manufacturer recommends at least yearly cleaning with a vacuum cleaner to remove any dust or lint that has accumulated.
  Answered on 9/8/2011 by PexSupply Staff from NY
Beacon Morris K84 Kick Space Heater
Q:
I understand the the unit starts and stops based on the water temp. is that adjustable?
Asked on 7/12/2011 by Bob from NY
Know the answer? Answer this question
2 answers
- CUSTOMER CARE
  
  A:
  The temperature is measured by an aquastat and there is a low temperature aquastat available ( http://www.pexsupply.com/Beacon-Morris-BMKR02024-L01-Low-Temp-Aquastat-For-Kickspace-Heaters ).
  Answered on 7/20/2011 by PexSupply Staff from NY
- VERIFIED BUYER
  
  A:
  I saw no adjustment on the thermostat and don't believe that it is adjustable. The fan will remain on even when the house thermostat turns off the zone circulator so that all of the available heat can be extracted from the unit. You might want to check the attachment of the heat sensor to the copper tubing though. I snugged up the squeeze clamp to connect more tightly to the tubing for a better read of pipe temperature. Too loose of a connection may prevent the fan from coming on as soon and as long as it should.
  Answered on 9/5/2011 by marstonpw from Massachusetts
Beacon Morris K84 Kick Space Heater
Q:
Will the K84 Kick Space Heater fit in a 24" Wide Cabinet? I am remodeling my kitchen and would like to use the biggest size possible.
Asked on 4/25/2011 by MIchael from Pittsburgh, PA
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  Please refer to page 2 of the manual below for detailed sizing information.
  
  http://s3.pexsupply.com/manuals/1249544810331/Beacon-Morris-Kickspace-Installation.pdf
  Answered on 4/27/2011 by PexSupply Staff from NY
Beacon Morris K84 Kick Space Heater
Q:
How quiet is this unit? Thinking of building it into a window seat by the bed. Will the fan be noticeable? Anybody know how many db?
Asked on 3/30/2011 by Anonymous
Know the answer? Answer this question
3 answers
- CUSTOMER CARE
  
  A:
  The DB level on max is 60-62. On min it is 49-53.
  Answered on 3/31/2011 by PexSupply Staff from NY
- VERIFIED BUYER
  
  A:
  It is very quiet, not sure if you are a light sleeper or not, but i wouldn't have a problem with it, however my wife would. So it is hard to say. Think of the sound as a small table fan....about the same. Hope this helps.
  Answered on 4/12/2011 by Roman from Pomona, NY
- VERIFIED BUYER
  
  A:
  low fan speed is fairly quiet --- I put 2 of them in a client's kitchen - barely noticeable ---- bedroom might be a different situation.
  Answered on 4/18/2011 by pablo from Kensington MD
Beacon Morris K84 Kick Space Heater
Q:
Does the K84 come with a warranty? And if so what is the warranty?
Asked on 3/12/2011 by ken - Mal from Attleboro, MA
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  This unit has a 5-year warranty.
  Answered on 3/14/2011 by PexSupply Staff from NY

Displaying questions 1-10Previous | Next »

Do you have a question about this product?

You May Also Want

View Specs

Product Specifications
Type:	Hose Kit
Accessory For:	K42
Accessory For:	K84
Accessory For:	K120
Application:	Accessory
Length:	10 Ft Hose
Connection Size:	1/2"
Pipe Size:	1/2"

Beacon Morris HK-10 - Kick Space Heater Hose Kit for K42, K84 or K120

$56.25

View Specs

Product Specifications
Type:	Wall Surface Kit
Width:	22-3/32"
Height:	24"
Color:	White
Finish:	Baked Enamel
Application:	Heating
Depth:	4-3/8"
Model:	F84

Beacon Morris F84 - F84 Surface Mount Cabinet Kit

$105.59

View Specs

Product Specifications
BTU:	1480-5240 btu/hr
Width:	12-1/4"
Height:	3-7/8"
Flow Rate:	1-3GPM
Model:	K42
Application:	Heating
Depth:	12-3/4"
Type:	Kickspace Heaters
Water Connection:	1/2"

Beacon Morris K42 - K42 Kick Space Heater

$137.95

View Specs

Product Specifications
Type:	Wall Recess Kit
Width:	23"
Height:	25"
Color:	White
Finish:	Baked Enamel
Application:	Heating
Depth:	4"
Model:	W84

Beacon Morris W84 - W84 Recessed Cabinet Kit

$122.95

Air Eliminators	Nipples
Air Valves	Pipe Insulation
Aquastats & Wells	Pressure Valves
Baseboard Heaters	Pumps & Flanges
Boilers	Radiant Heat
Expansions Tanks	Radiator Valves
Fittings	Relief Valves
Flow Controls Valves	Switching Relays
Flow Switches	Tekmar Controls
Gas Valves	Temperature Controllers
Gauges	Thermocouples
Heating Specialties	Thermostats
Kickspace Heaters	Transformers
Low Water Cutoffs	Water Feeders
Mixing Valves	Zone Valves & Controls

Access Doors	PEX Plumbing
Backflow Preventers	Plumbing Specialties
Chemicals & Compounds	Pumps
Expansion Tanks	Solder
Faucets & Sinks	Stops & Risers
Fittings	Tools
Flush Valves	Toilet Parts
Grease Traps	Tub & Shower Products
Outlet Boxes	Tubular Goods & P-Traps
Nipples	Valves
Pipe Hangers	Water Filters
Pipe Insulation	Water Heaters

Air Cleaners	HVAC Controls
Air Conditioners	Line Sets
AC Install Parts	Mini-Split Air Conditioners
Condensate Pumps	Replacement Parts
Dampers	Registers & Grilles
Dehumidifiers	Replacement Filters
Filter Driers	Thermostats
Flex Duct	Tools
Humidifiers	Ventilation Fans

Project Help

Project Help

Project Help

Forgot Your Password?

Returning Customers – Sign In

Checkout as a Guest

K84 Kick Space Heater

Returns & Exchanges

Shipping Information

Lowest Price Guarantee

MAP Price

Security 100% Guaranteed

Privacy

CVV Code

Specs

BTU

Flow Rate

Description for Beacon Morris K84

K84 Kick Space Heater

Q&A: Ask the Questions, share answers

You May Also Want

Specifications

Specifications

Specifications

Specifications

Product Zoom

Video

Join Our Mailing List - Sign up and receive special offers and coupons