1" x 3/4" SharkBite Reducing Coupling Zoom

1" x 3/4" SharkBite Reducing Coupling

SKU:U060

Brand: Cash-Acme

Cash-Acme
Qty Price
$14.25
/ each
$80.70 / box (6 units x $13.45)
In Stock! Ships in 24-48 Hours
22 Available

Specs

Size: 1" x 3/4"
PEX Size: 3/4"
1"
Material: Brass
Application: Heating
Plumbing
Max PSI:
?
200 psi
Warranty: 5-Year Limited Warranty
Standards Met: ASTM F1960
NSF
ASTM F877
Fitting System Compatibility: Push Fit (Sharkbite)
Tubing Compatibility: PEX
CPVC
OD Controlled Copper
Max Temp (F): 200°F

Description for Cash-Acme U060

Designed to simplify pipe installation. Instant push-fit connection for increased ease-of-use- no soldering required. Fittings certified to 200 PSI and 200 degrees F (93 degrees C). Fits OD controlled copper, CPVC, or PEX pipe. Design certified and agency listed. Compact, corrosion resistant, robust DZR brass body. Design certified to ANSI/NSF-61 product standard for use in potable water systems. No loose components, integrated design. Approved to be used underground and behind walls without access panels. Designed for hydronic heating as well as potable water distribution. Designed certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels and they meet UPC, IPC, and cUPC requirements.

1" x 3/4" SharkBite Reducing Coupling

REVIEW SNAPSHOT®

by PowerReviews
Cash-Acme 1" x 3/4" SharkBite Reducing Coupling
 
5.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

5/26/2011
 
5.0

Shark Bite Fittings are Amazing

By Dan

from IN

Verified Buyer

Pros

    Cons

      Best Uses

        Comments about Cash-Acme 1" x 3/4" SharkBite Reducing Coupling:

        It is surprising how well these things work! They seem too simple and good to be true but they do the job and don't leak.

        I used couplers so I could implement a full-PEX system without replacing all my fixtures at once. I just cut the in-place copper tubing that runs to the fixtures and joined them with the Shark Bite couplers. Getting a good even cut on the copper is key and cannot be overstated. The ONLY joins that leaked were ones that I did not confirm a good cut on the copper. A quick re-cut and a little filing and the join was good to go. They never leaked on the PEX side.

        I would definitely recommend these over imitations you might see at your local big box store. They may look similar but they aren't the same! I had to use a couple in a pinch but went back to replace them when I was able to get the Shark Bites I needed.

        • Primary use:
        • Personal

        Bottom Line Yes, I would recommend this to a friend

        Was this review helpful? Yes / No

         - You may also flag this review

        Displaying review 1

        Back to top

        Q&A: Ask the Questions, share answers

        Do you have questions about this product?

        get answers from real customers and in-house experts with AnswerBox.

        2 Questions | 3 Answers
        Displaying questions 1-2
        • Cash-Acme 1" x 3/4" SharkBite Reducing Coupling

          Q:

          Is there a Shark Bite fitting that will fit over a 3/4 Galvinized pipe and convert to 3/4 copper?
          Asked on 3/27/2012 by Tom from Mexico, NY

          2 answers

          • VERIFIED BUYER

            A:

            In short, no. Galvanized pipe isn't generally uniform enough for Shark Bites and you need to use a dielectric union to avoid galvanic corrosion.
            Sent from my iPad

            Answered on 3/27/2012 by Another PexSupply Customer

          • CUSTOMER CARE

            A:

            You would need to use a threaded SharkBite fitting to connect to threads on the galvanized pipe. The copper could connect to the SharkBite portion of the fitting.

            Answered on 3/27/2012 by PexSupply Staff from NY
        • Cash-Acme 1" x 3/4" SharkBite Reducing Coupling

          Q:

          how do i check to see what size tubing this will fit
          Asked on 3/14/2011 by Anonymous from sellersville pa

          1 answer

          • CUSTOMER CARE

            A:

            This part will fit 1" copper, PEX, or CPVC on one side and 3/4" copper, PEX, or CPVC on the other side.

            Answered on 3/15/2011 by PexSupply Staff from NY
        Displaying questions 1-2

        Do you have a question about this product? 

        Free Shipping on orders over $300

        You May Also Want

        PexSupply.com Logo

        Join Our Mailing List - Sign up and receive special offers and coupons

        Nextag Seller PriceGrabber User Ratings for Pex Supply PHCC BBB Reliability Seal
        HACKER SAFE certified sites prevent over 99.9% of hacker crime. Facebook Twitter Youtube