Enter your e-mail address below to have your password reset. You will receive an e-mail with a new temporary password in it.
Your new password is on its way. If you have problems accessing your account, please contact us at 1-888-757-4774 and we'll help you out.
I'm sorry, your e-mail was not found in our system.
If you think this is a mistake, please contact customer service at 1-888-757-4774 or via e-mail here.
Sign in to access your account and complete your order.
You will have the option to create an account on the order confirmation page.
This category contains many clamps, hangers and straps including Beam Clamps, C Clamps, Band Irons, Clevis Hangers, Copper Clevis Hangers, Copper Straps, Galvanized Straps, Stud Brackets (Copper HoldRites)
Band Iron & Copper Band Iron
C Clamps are used to attach I beams, channels, and wide flange beams.
This section contains Beam Clamps designed for roof installations with bar joist type construction, as well as to be attached mechanically to the top or bottom flange of steel beams.
Clevis Hangers are used to suspend non-insulated stationary pipe.
This section contains Stud Brackets, Flush Valve Brackets Sink Rough-In Brackets, Pipe-On-Pipe Brackets, DWV Hangers, Milford Hangers, and Natick Hangers.
This category contains Swivel Rings and Band Hangers. They are used to suspend pipe from joists, steel beams, wooden rafters or walls. They can be used in both horizontal and vertical applications.
This section contains Threaded Rods manufactured by Carpenter & Paterson.
This contains Straps and Riser Clamps. Straps are used to clamp tubing flush to the surface in both vertical and horizontal applications. Riser Clamps are used for supporting piping through floors where extreme load conditions exist.
This category contains black, electro-galvanized and copper split rings. Split Rings are used to suspend pipe from joists, steel beams, wooden rafters or walls. They can be used in both horizontal and vertical applications.
This category contains electro-galvanized and copper pipe hooks. Pipe hooks are used to hang pipes from floor joists.
This category contains multi-strut channels, multi strut pipe clamps and strut nuts
This category contains van hangers
This category contains a variety of J-Hooks, such as, DWV J-Hooks and CTS J-Hooks.
This section contains No-Hub Fitting Restraints, which are ideal for restraining Hubless Cast Iron Soil Pipe joints against separation during high thrust conditions.
This category contains Round and Fender Washers.
This category contains stud guards.
Hex Nuts are the most common nut shapes. A nut is a type of fastener with a threaded hole. This category contains finished and heavy hex nuts.
This category contains miscellaneous pipe hanger items such as, side beam connectors, angle knees, cable ties, and tab tape, etc.
A pipe hanger is a device used to support a pipe or group of pipes from a slab, beam, ceiling, or other structural element.
C Clamps are used to attach I beams, channels, and wide flange beams. These clamps are called "C" clamps because of their C shaped design. C-clamps are also available in models that include a locking nut to prevent loosening due to vibration. Beam Clamps are designed for roof installations with bar joist type construction. They can also be attached mechanically to the top or bottom flange of steel beams. Straps & Riser Clamps
Straps are used to clamp tubing flush to the surface in both vertical and horizontal applications. Riser clamps are used for supporting piping through floors where extreme load conditions exist. Multi Strut Clamps are designed to support stationary pipe and tubing lines from strut channels or on rooftop pipe and equipment supports.
Clevis Hangers are used to suspend non-insulated or insulated stationary pipe. They are available in copper, carbon steel, and electro-galvanized finishes for non-insulated pipe applications. Insulated-pipe applications require a unique insulated coupling clevis hanger. These hangers mount directly to strut or suspended hanger rods.
Pipe Support Brackets
A band iron is a thin metal strap commonly used when a pipe must be hung lower than a J-Hook can reach. These are similar to stud brackets but come coiled and are bendable. Band irons are available in copper or iron.
Stub brackets are used for supporting 1/2" to 2" piping and are ideally used in toilets, sinks, lavatories and other residential and commercial applications.
DWV hangers are designed to provide an economical and simple way to support non insulated PVC drain, waste, and vent pipe lines.
Flush valve brackets are generally used in water closet applications.
Milford hangers are used to suspend copper tubing from floor joists in horizontal applications.
Overhead pipe brackets are utilized when piping must be suspended from the ceiling.
Pipe on pipe brackets are particularly useful in pre-fab applications when horizontal or vertical pipe support is required.
Swivel Rings are used to suspend pipe from joists, steel beams, wooden rafters or walls. They can be used in horizontal or vertical applications. Split Rings are designed to support non-insulated stationary pipe lines. They can suspend pipe from joists, steel beams, wooden rafters, or walls. They can be used in both horizontal and vertical applications.
Pipe Hooks are used to hang pipes from floor joists. J Hooks are hangers, in the shape of the letter "J". The "J" shape allows the hook to be fastened to other objects in such a way that it can provide good support and be securely attached.
Van Hangers are designed for use as a standoff clamp and can be used to mount copper in both vertical and horizontal applications.
No Hub Fitting Restraint are used for overhead pipe support and for restraining hubless cast iron soil pipe joints against separation during high thrust conditions.
We carry a huge selection of Carpenter & Paterson, and Oatey pipe hangers and supports.
Subscribe to our Channel
Like Us on Facebook
Visit Our Blog
At PexSupply.com, our goal is to bring you the highest quality plumbing, heating and HVAC supplies at competitive prices. Our product catalog includes PEX Plumbing Supplies, Radiant Heat Supplies, VisionPro Honeywell Thermostats, Taco pumps and mini-split air conditioners. If there are items you are looking for but can't find on our website, please contact our Customer Service Representatives & we will do our best to find what you need.
© 2014 PexSupply.com