12" Automatic GVD Vent Damper Zoom

12" Automatic GVD Vent Damper

SKU:GVD-12PL

Brand: Field Controls

Field Controls
Qty Price
$163.95
/ each
In Stock! Ships in 24-48 Hours
12 Available

Specs

Size: 12"
Width: 16-7/8"
Length: 12-1/8"
Application: Air Quality
Voltage:
?
24v
Clearance: 4"
Exposed Pipe: 10-7/8"
Motor Timing: 15 Seconds Power Closed
15 Seconds Power Open
Shape: Round

Description for Field Controls GVD-12PL

The Field Vent Damper works automatically to allow natural draft during appliance operation while preventing residual appliance heat and conditioned air from escaping during off cycles. It also prevents the infiltration of cold air during down drafts.
Safety Features

  • Dual safety switches allow the burner to fire only when the damper is in the open position. This unit will not interfere with existing appliance safety controls, when properly installed.
Operational Features
  • Operates with all 24 VAC, 60hz intermittent ignition and standing pilot ignition systems.
  • Stainless steel construction provides superior corrosion resistance.
  • Damper operation: power opens in 15 seconds, power closes in 15 seconds. Power is off at damper motor when it is at rest.
  • Hold open switch allows damper to be placed in an open position and taken out of service to assist with trouble shooting appliance problems.
  • Keyed wiring harness connector plug installs only one way, preventing incorrect wiring connection.
Dimensions
  • Pipe Size: 12"
  • Length: 12-1/8"
  • Height: 16-7/8"
  • Clearance: 4"
  • Exposed Pipe: 10-7/8"
How the GVD Works
  • The Field Vent Damper is installed in the vent pipe, after the draft hood, or barometric. During off cycles, it remains closed, preventing air flow through the vent. When there is a call for heat, the motor is energized, rotating the damper 90 degrees to an open position. Opening and closing takes approximately 15 seconds. When the damper is fully open, the burner is allowed to fire and flue gases pass freely through the vent. When the thermostat is satisfied, the burner stops, and the damper automatically closes. For service and trouble shooting, the damper can be locked in the open position.
Electrical Specifications
  • Minimum wiring requirements: 24 VAC - 18 gauge - 105 degrees C
  • Power requirements: 3 watts at 24 VAC, 60 Hz, when opening or closing

12" Automatic GVD Vent Damper

REVIEW SNAPSHOT®

by PowerReviews
Field Controls6" Automatic GVD Vent Damper
 
4.7

(based on 27 reviews)

Ratings Distribution

  • 5 Stars

     

    (22)

  • 4 Stars

     

    (4)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

96%

of respondents would recommend this to a friend.

Most Liked Positive Review

 

So far so good

I bought this to replace same. Installation was relatively easy - wiring was a cinch since the wiring harness was identical to the unit I was removing. As the replacement was done in July ...Read complete review

I bought this to replace same. Installation was relatively easy - wiring was a cinch since the wiring harness was identical to the unit I was removing. As the replacement was done in July i won't have any real experience with the part until Oct-Nov, but it did close as soon as the wiring harness was connected.

VS

Most Liked Negative Review

 

appears to be built well

product looks like it is built well but can't use it. It ships without a electrical wire and connector. Does not give this info on the description.

product looks like it is built well but can't use it. It ships without a electrical wire and connector. Does not give this info on the description.

Reviewed by 27 customers

Sort by

Displaying reviews 1-10

Back to top

Previous | Next »

2/13/2012
 
5.0

Quick shipping, all went well!

By Tommy

from Ma

Verified Buyer

Comments about Field Controls 5" Automatic GVD Vent Damper:

A-OK!

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

2/8/2012
 
5.0

Great product at a great value...

By Qnimbus J.

from Washington, DC

Verified Buyer

Comments about 6" Automatic GVD Vent Damper:

Everything that I needed came with it. Installation was quick and easy. The electrical connector did not have to be modified at all. Overall an exceptional product.

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

1/9/2012
 
5.0

easy to install

By Carpenter

from Rhode Island

Verified Buyer

Comments about 6" Automatic GVD Vent Damper:

Had to replace existing unit. Was very easy.to do,

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

12/9/2011
 
5.0

Exact Replacement for old Efikal

By tonejone

from Macomb, MI

Verified Buyer

Comments about Field Controls 5" Automatic GVD Vent Damper:

My 10 year old Effikal, stopped opening when boiler called for heat. Luckly the BYPASS Mode still worked,allowing the Boiler burner to fireup.
PEX fixed me up with exact replacement!

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

11/21/2011
 
5.0

Just Amazing

By RoyalCheryl

from Vestal, NY

Verified Buyer

Comments about 6" Automatic GVD Vent Damper:

Very easy to install.

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

11/17/2011
 
5.0

Easy to install -- does the job!

By db

from Albuquerque, NM

Verified Buyer

Comments about 6" Automatic GVD Vent Damper:

This vent damper does the job!

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

11/15/2011
 
4.0

Works great. has a good seal.

By vjones008

from san mateo, ca

Verified Buyer

Comments about Field Controls 8" Automatic GVD Vent Damper:

simple to install. reliable. effective way to shut off zones from HVAC system.

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

9/26/2011
 
5.0

Fast service !

By gkihle

from co

Verified Buyer

Comments about Field Controls 7" Automatic GVD Vent Damper:

works just fine

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

9/7/2011
 
4.0

Good Product

By diyer

from manchester, nh

Verified Buyer

Comments about Field Controls 7" Automatic GVD Vent Damper:

Easy to install if you can read electrical diagrams. The diagrams included in the instructions are not great.

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

5/10/2011
 
5.0

Great Product

By Home Handyman

from Nelson, BC

Verified Buyer

Comments about Field Controls 5" Automatic GVD Vent Damper:

Install took 5 minutes, works great. [...]

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

Displaying reviews 1-10

Back to top

Previous | Next »

Q&A: Ask the Questions, share answers

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

12 Questions | 14 Answers
Displaying questions 1-10Previous | Next »
  • Field Controls 8" Automatic GVD Vent Damper

    Q:

    How much does this control improve AFUE on the boiler?
    Asked on 2/26/2012 by OddSizeWrench from Metro Boston

    1 answer

    • CUSTOMER CARE

      A:

      According to the manufacturer, it increases efficiency between 5% and 10%.

      Answered on 3/5/2012 by PexSupply Staff from NY
  • Field Controls 4" Automatic GVD Vent Damper

    Q:

    can i use on a oil fired boiler
    Asked on 12/22/2011 by Anonymous

    2 answers

    • CUSTOMER CARE

      A:

      This unit is rated for use with a gas-fired boiler, not an oil-fired boiler.

      Answered on 12/23/2011 by PexSupply Staff from NY

    • A:

      look at the OVD model. I just installed one and it works great

      Answered on 1/12/2012 by kayak_guy from southern CT
  • 6" Automatic GVD Vent Damper

    Q:

    Will this replace an Effikal RVGP-KS-6BKF Serial # E 2994542 and will the wiring harness plug and play.
    Asked on 9/7/2011 by Karl from Lakewood, OH

    1 answer

    • CUSTOMER CARE

      A:

      According to the manufacturer, you can either replace the entire unit or just the motor assembly. The GVD and the Effikal RVGP are interchangeable.

      Answered on 9/8/2011 by PexSupply Staff from NY
  • Field Controls 4" Automatic GVD Vent Damper

    Q:

    Does it come with the 24V transformer?
    Asked on 8/14/2011 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      No, the damper is operated by the transformer on the boiler.

      Answered on 8/15/2011 by PexSupply Staff from NY
  • Field Controls 7" Automatic GVD Vent Damper

    Q:

    I have an older (1989) Utica gas fired hot water boiler and would like to install the Field Controls 7' Automatic GVD Vent Damper. Will the universal wiring harness work with a Honeywell L8148#1257 aquastat controller without the plugin?
    Asked on 4/27/2011 by Steve from Claremont, NH

    1 answer

    • CUSTOMER CARE

      A:

      According to the manufacturer, the GVD-7PL will work for that unit along with the universal wiring harness. If you use the GVD-UWK you would need to cut off the end that would normally plug into the appliance and hard-wire it like the diagram in the GVD instructions.

      Answered on 4/28/2011 by PexSupply Staff from NY
  • Field Controls 7" Automatic GVD Vent Damper

    Q:

    Will this unit replace a Slant/Fin automatic damper? If so are the wiring plugs the same? thanks for your response.
    Asked on 4/7/2011 by Rick W from N Kingstown, RI

    1 answer

    • CUSTOMER CARE

      A:

      According to the manufacturer, they would be the same.

      Answered on 4/7/2011 by PexSupply Staff from NY
  • Field Controls 5" Automatic GVD Vent Damper

    Q:

    will this replace a effikal rvgp-ks-5bkf and can i use the same wiring harness?
    Asked on 2/21/2011 by tj from indiana

    2 answers

    • CUSTOMER CARE

      A:

      The GVD-5PL is the replacement for the Effikal RVGP-KS-5BKF. You can use the same harness that is on the boiler.

      Answered on 2/21/2011 by Field Controls

    • VERIFIED BUYER

      A:

      yes the Harness is perfect match!

      Answered on 12/9/2011 by tonejone from Macomb, MI
  • 6" Automatic GVD Vent Damper

    Q:

    how to test this damper
    Asked on 1/30/2011 by tony from queens ny

    1 answer

    • CUSTOMER CARE

      A:

      You would put a 24-volt power on the brown wire and the common on the black wire. Then you would put 24 volts on the orange wire (this would cause the motor to drive open). After the damper fully opens, remove the 24 volts from the orange wire and the damper should drive close.

      Answered on 2/3/2011 by PexSupply Staff from NY
  • Field Controls 5" Automatic GVD Vent Damper

    Q:

    i need to replace a honeyell automatic vent damper will this one work with it
    Asked on 1/21/2011 by joe the plumber from spencer, Ia

    1 answer

    • CUSTOMER CARE

      A:

      Yes, this one should work.

      Answered on 2/2/2011 by PexSupply Staff from NY
  • 6" Automatic GVD Vent Damper

    Q:

    Does this product have a warrenty?
    Asked on 12/27/2010 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      Yes, this product has a one year warranty.

      Answered on 1/6/2011 by PexSupply Staff from NY
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 

Free Shipping on orders over $300
PexSupply.com Logo

Join Our Mailing List - Sign up and receive special offers and coupons

Nextag Seller PriceGrabber User Ratings for Pex Supply PHCC BBB Reliability Seal
HACKER SAFE certified sites prevent over 99.9% of hacker crime. Facebook Twitter Youtube