Enter your e-mail address below to have your password reset. You will receive an e-mail with a new temporary password in it.
Your new password is on its way. If you have problems accessing your account, please contact us at 1-888-757-4774 and we'll help you out.
I'm sorry, your e-mail was not found in our system.
If you think this is a mistake, please contact customer service at 1-888-757-4774 or via e-mail here.
Sign in to access your account and complete your order.
You will have the option to create an account on the order confirmation page.
This product does not comply with the "Safe Drinking Water Act,"
which requires that products used in any system providing water for human
consumption (drinking or cooking) to meet low-lead standards.
Please check the box below to confirm you are aware of that this item is for non-potable water applications only.
This product will NOT be used in the installation or repair of a potable water (human consumption) application.
You must agree to this statement in order to purchase this product.
We accept returns of any unused and unopened merchandise within 5 days of receipt and accept returns of defective merchandise within 14 days of receipt. All returns must be accompanied by a Return Goods Authorization, which may be obtained by contacting a customer service representative either by phone or by e-mail. All manufacturer warranties are honored and claims should be made through PexSupply.com.
See full Return Policy.
Add this item to your cart to calculate shipping cost.
The entire staff at PexSupply is committed to doing everything we can to ship your order out accurately and as quickly as possible. Most orders ship within 1-3 business days and expedited orders go out the same day when placed before 3:00pm EST. If an item is back ordered for any reason, you will be notified via e-mail. Please note in the special instructions at checkout if you need receive your order by a specific date.
See full Shipping Policy.
PexSupply.com is committed to providing you with the highest quality products at the lowest prices available. We are committed to competitive prices and will honor our Low Price Guarantee if you find an identical item at a lower price.
For complete information on our low price guarantee, go here.
There is a Minimum Advertised Price (MAP) allowed by the manufacturer on this product. Add item to cart for lowest price.
We are dedicated to protecting your order information. Because of this, all personal data that is transmitted through our site is encrypted using SSL or "Secure Socket Layer" technology which encrypts your order information to avoid the decoding of your information by anyone other than PexSupply.
At PexSupply.com, we are committed to protecting your privacy. This means that we will not distribute, sell or rent your name or personal information about you to any third party without your permission.
For complete safe shopping information, go here.
Your privacy is of great concern to PexSupply. We use the information you provide to process your order and to ensure that your experience on our site is as enjoyable and efficient as possible. Our primary focus and greatest concern is you, our customer. We respect your privacy and therefore do not sell, rent or loan any of your personal information to any third party.
We are committed to protecting your privacy. We use the information that we collect about you to process your orders and to provide a personalized shopping environment. When you purchase products from PexSupply.com or register for any PexSupply.com services, we automatically place you on our list to receive e-mail updates about special offers, new products, and new services.
A credit card Identification Number is an added safeguard for your credit card purchases. Depending on the type of credit card you use, it is the 3- or 4-digit number printed on the back or front of your credit card. For most online credit card purchases from us, the Identification Number is required information.
MasterCard: Your identification number is the 3-digit number found on the back of your credit card near the signature panel.
Visa: Your identification number is the 3-digit number found on the back of your credit card near the signature panel.
American Express: Your identification number is the 4-digit number found on the far right on the front of your credit card.
The HS35 Expandable Manual and Auto Ranging Stick Meter includes the tests you use everyday for HVAC/R field service. Like the rest of the HS30 series, the HS35 works with all of our accessory heads. It comes equipped with a magnetic hanger, detachable silicone test leads and alligator clip probe tips for remote and easy one-handed testing, as well as the full set of built-in safety features. This auto-ranging stick meter also includes a bar graph on the LCD for an analog feel. Technicians say built-in temperature with excellent compensation and capacitance ranges are a big plus. Technicians also like having the choice between manual ranging and auto ranging when hooking up to test points with the push of a button.
The HS35 is an auto or manual ranging DMM and works with all Fieldpiece accessory heads enabling the user to test a wider variety of parameters from a single meter. Plus the removable tip test leads and alligator probe extensions make safe one-handed testing a snap. The k-type thermocouple port on the front of the meter allows you to test a number of HVAC parameters right there from your multimeter. As with all electrical testing, please read the Operator's Manual and associated safety practices thoroughly before testing and adhere to industry best practices for safety when testing any current carrying device.
Auto Ranging Mode
The HS35 is an auto ranging meter and is very accurate. For this reason, when you switch to a position on the meter that auto ranges, you're likely to see movement on the display. For example, when the dial is turned to VAC the meter will drop to the millivolts range and you'll see an "m" on the bottom of the LCD signifying a millivolt reading. The meter is picking up very low transient voltages in the air. Close the circuit by touching the leads together away from a voltage source. You'll see the meter zero or a very small, stable millivolt reading.
Manual Ranging Mode
Use it as a manual ranging meter by pressing the RNG button for approximately one second. You'll see RANGE appear in the upper left corner of the LCD (display). The decimal point will move, indicating which range you are on, each time you press RNG in this mode. If you have the wrong voltage selected you will get an "OL" (Out of Range) on your display. To switch back to auto ranging press and hold the RNG button for approximately one second until "RANGE" disappears from the top left of the LCD. This eliminates the transient voltages in the air that you see in auto ranging mode unless you are in the mV range and disconnected from a voltage source.
For DC voltage, set the meter to the VDC parameter instead of VAC. For all ranges choose a range just above the value you expect. If display reads "OL" (overload), select a higher range. If display shows less than three numbers, select a lower range for better resolution.
Features and Benefits:
The HS meter series is unlike any other found in HVAC/R. We incorporate a number of safety features, both those you can and can't see, into our meters. In addition, the HS series accepts modular test instrument accessory heads. The HS35 is the top of the line stick meter. It includes the features and benefits that technicians tell us they need to do their job easier, better and faster:
With the red NCV tab on the tip of the meter close to an AC voltage, press and hold the NCV button. The NCV LED will light and the beeper will beep. The closer you get to AC voltage, the louder the beep. The NCV function is sensitive enough to detect 24VAC on thermostats.
For motor-start and motor-run capacitors. Disconnect the capacitor from power first. Short the terminals to discharge the capacitors. Disconnect any resistors that might be between the terminals of the capacitor.
For measuring the flame diode current in a heater control.
High Voltage and Continuity Indicators
In any VAC/VDC range, when you touch a voltage greater than 30V, the beeper will beep and the red Hi-V LED will signal you. Be careful! The continuity beeper and green LED tell you if the circuit you're testing is open or closed (using the switch position to the right of OFF).
Press MIN/MAX once to begin recording MIN and MAX. Press MIN/MAX to select current reading's MIN or MAX. Hold down for 2 seconds to exit MIN/MAX function.
Plug any K-type thermocouple directly into the meter to measure temperature. Temperature measurement will be accurate even in fast changing environments because of excellent temperature compensation. One thermocouple is included. No adapter is required.
Silicone Leads with Detachable Probe Tips
Because the wire insulation is silicone the leads will stay flexible in cold weather and will not melt if bumped by a soldering iron. When testing electrical circuits with two hands, there is a risk that a careless mistake may complete a circuit through your body and potentially cause death or injury. Detachable probes tips and the modular design of the HS36 allow you to plug V lead tip into the top of the meter, connect an alligator lead tip to COM and ground, and perform a one-hand test more easily than most any meter on the market.
Subscribe to our Channel
Like Us on Facebook
Visit Our Blog
At PexSupply.com, our goal is to bring you the highest quality plumbing, heating and HVAC supplies at competitive prices. Our product catalog includes PEX Plumbing Supplies, Radiant Heat Supplies, VisionPro Honeywell Thermostats, Taco pumps and mini-split air conditioners. If there are items you are looking for but can't find on our website, please contact our Customer Service Representatives & we will do our best to find what you need.
© 2014 PexSupply.com