Enter your e-mail address below to have your password reset. You will receive an e-mail with a new temporary password in it.
Your new password is on its way. If you have problems accessing your account, please contact us at 1-888-757-4774 and we'll help you out.
I'm sorry, your e-mail was not found in our system.
If you think this is a mistake, please contact customer service at 1-888-757-4774 or via e-mail here.
Sign in to access your account and complete your order.
You will have the option to create an account on the order confirmation page.
This product does not comply with the "Safe Drinking Water Act,"
which requires that products used in any system providing water for human
consumption (drinking or cooking) to meet low-lead standards.
Please check the box below to confirm you are aware of that this item is for non-potable water applications only.
This product will NOT be used in the installation or repair of a potable water (human consumption) application.
You must agree to this statement in order to purchase this product.
This product was discontinued by the manufacturer.
Read amps and volts at the same time with the Dual-Display Mini Clamp Meter for HVAC/R, model SC52. Measure any other range on the meter simultaneously with an amp measurement. The SC52 is compact measuring only about 8-inches, easy to use and includes many of the ranges you use everyday during HVAC/R field service. It includes the ranges for flame diode rectification and a diode test for checking circuits, as well as built-in safety features like non-contact voltage, a hold button and a continuity tester with audible alarm.
How Does it Work?
The SC52 is an auto ranging DMM that with a dedicated amp clamp and display, as well as a display for the rest of the ranges on the meter. When you select a range and hook up to the circuit, the SC52's bottom display automatically includes symbols or proper decimal places for the range you are testing. If you are out of the given range on this meter you will receive and "OL" message. The push button non-contact voltage feature allows you to determine whether a line is hot or not right on the meter.
Features and Benefits:
The SC52 display allows you to read amperage while testing any other function on the dial. More tests at one time means the job gets done right and the job gets done faster.
With the NCV tab on the tip of the clamp close to an AC voltage, press and hold the NCV button. The NCV LED will light with an analog feel and the beeper will beep. The closer you get to AC voltage, the louder the beep. The NCV function is sensitive enough to detect 24VAC on thermostats (24V to 600V, 50Hz to 60Hz).
Using the built-in amp clamp, read 0-400 amps directly on your meter with 0.1 resolution.
Microamps DC - Flame Rectification Tests
The most common "no heat" call has to do with a malfunctioning flame sensing diode. Simply turn the SC52 to microamps DC, hook up, and see if the flame sensing rod is functioning properly.
Wire Grabbing Jaw
The amp clamp is shaped like a jaw to make grabbing a single wire easy using only one hand.
The HOLD button is easily pressed with your thumb while holding the mini clamp meter naturally in your hand. It holds any reading on your SC52 so you can concentrate on the test points and look at the LCD after you've disconnected.
Subscribe to our Channel
Like Us on Facebook
Visit Our Blog
At PexSupply.com, our goal is to bring you the highest quality plumbing, heating and HVAC supplies at competitive prices. Our product catalog includes PEX Plumbing Supplies, Radiant Heat Supplies, VisionPro Honeywell Thermostats, Taco pumps and mini-split air conditioners. If there are items you are looking for but can't find on our website, please contact our Customer Service Representatives & we will do our best to find what you need.
© 2014 PexSupply.com