Zoom

3/4" Sweat Zone Valve (Connection = 18" Leads)

SKU:V8043E1012

Brand: Honeywell

3/4" Sweat Zone Valve (Connection = 18" Leads)
Qty	Price
	$54.85 / each
	$264.75 / box (5 units x $52.95)

In Stock! Ships in 24-48 Hours

Order Today, Receive Tue. May 21 Order Today, Receive Wed. May 22 Order Today, Receive Wed. May 22

1530 Available

Specs

Product Specs
Size:	3/4"
Width (Inches):	3-1/2"
Application:	Zoning
Height:	4"
Material:	Brass
Amperage: ? Amperage close Amperage, or amps, refers to the amount of electricity flowing through the wires.	0.3
Voltage: ? Voltage close Voltage, or volts, is a measurement of the difference between two electric fields (in heating terms, the difference between the Earth's electrical field and the electricity running through your wires).	24v
Depth (Inches):	2-3/8"
Max Pressure (PSI):	300 psi
Flow Capacity (Cv):	3.5 Cv
Wiring:	18" Leads
Body Pattern:	2-Way
	Straight-Through
Hertz:	59
Max Ambient Temp (°F):	125°F
Max Close-Off PSI:	20 psi
Position:	Normally Closed
Temperature Range (F):	50°-200°F
Min Temp (F):	50°F
Max Temp (F):	200°F
Connection Type:	Sweat

Description for Honeywell V8043E1012

Description: 24V 3/4 in. Sweat Connection Low Voltage Motorized Zone Valves
Application: Hydronic Control
Connection Type: Sweat
Pipe Size (inch): 3/4 in.
Pipe Size (DN): DN20
Body Pattern: Two-way, Straight-through
Capacity (Cv): 3.5 Cv
Capacity (Kv): 3.0 Kv
De-energized Position: Normally Closed
Maximum Close-off Pressure (psi): 20 psi
Maximum Close-off Pressure (kPa): 138 kPa
Fluid Temperature Range (F): 40 F to 200 F
Fluid Temperature Range (C): 5 C to 93 C
Electrical Connections (in.): 18 in. leads
Electrical Connections (mm): 457 mm leads
Power Consumption: 7.7 VA
Valve action: Spring Return
Maximum Ambient Temperature (F): 125 F
Maximum Ambient Temperature (C): 52 C
Dimensions (in.): 4 in. high x 3 1/2 in. wide x 2 3/8 in. deep
Dimensions (mm): 102 mm high x 89 mm wide x 60 mm deep
Type: 2 position
End Switch: SPST
End Switch Rating: 50 VA pilot duty @ 24 V;4.4 A running with 26.4 A inrush @ 120 V
Static Pressure (psi): 125 psi
Static Pressure (kPa): 862 kPa
Materials (Body): Brass
Materials (Seat): Brass
Materials (Stem): Stainless Steel
Materials (Ball Plug): Buna-N (NBR) Rubber Ball
Materials (Packing 0-rings): EPDM rubber
Voltage: 24V
Frequency: 60 Hz;50 Hz
Approvals, Underwriters Laboratories Inc: UL Component Listed: File MH11286 Vol. 1
Includes: End Switch enclosure.
Comments: Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water.
Tradeline Value: Tradeline
Used with: Actuator Integral
Nominal Timing (sec): 15 sec
Ref: Honeywell.com