HydroStat Universal Temperature Limit & Low Water Cutoff for Oil Boilers

Description for Hydrolevel 3150

Overview
By installing the control on an existing immersion well, HydroStat® can be used as a universal replacement for common Aquastat® models. (see "Note" at bottom for models this will replace) Whether it's a cold start or a tankless coil boiler, Hydrostat® will provide all the temperature functions of the control being replaced.

Or, install HydroStat® on a Hydrolevel Electro-Well (sold separately) to automatically activate the low water cut-off function. With HydroStat® you can add low water cut-off protection to new or existing installations without the added time and cost to install a separate control.

Features

• Replaces Cold Start and Triple-Action Aquastats®
• Install it on existing immersion well for full temperature functionality, or
• Install it on an Electro-Well to add low water cut-off protection
• Simple Dial Type Temp and Differential Settings
• Easy to wire - uses the same terminal designations as common Aquastat® models
• Dynamic Temperature Display
• Four on-board diagnostic indicating lights

• Burner Contacts: 7.4 FLA, 44.4 LRA@120VAC
• Circulator Contacts: 5.8 FLA, 34.8 LRA@120 VAC
• Operating Range - Low Limit: OFF or 110°F - 200°F
• Operating Range - High Limit: 100°F - 220°F
• Operating Range - Low Differential: 10°F - 30°F
• Operating Range - High Differential: 10°F - 30°F