1" Full Port Sweat Ball Valve Zoom

1" Full Port Sweat Ball Valve

SKU:HV100S

Brand: Hydrovalve

Hydrovalve
Qty Price
$11.20
/ each
$57.30 / box (6 units x $9.55)
In Stock! Ships in 24-48 Hours
1076 Available

Specs

Size: 1"
Material: Brass
Pressure Rating: 600 psi
Application: Plumbing
Connection Type: Sweat

Description for Hydrovalve HV100S

  • Brass ball valve (Full port) CXC
  • Forged brass body 600WOG
  • Steel handle with plastic handle

1" Full Port Sweat Ball Valve

REVIEW SNAPSHOT®

by PowerReviews
Hydrovalve1-1/4" Full Port Sweat Ball Valve
 
4.8

(based on 20 reviews)

Ratings Distribution

  • 5 Stars

     

    (16)

  • 4 Stars

     

    (3)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Most Liked Positive Review

 

Great high quality valve

The 10 pack is very economical compared to the box stores. Less than 1/2 the price.

The 10 pack is very economical compared to the box stores. Less than 1/2 the price.

VS

Most Liked Negative Review

 

Somewhat OK

Installed 24 of these on a hydronic heating system. 1 leaked at the stem right away. 3 others over the course of the following week. That resulted in 2 call back trips.
Read complete review

Installed 24 of these on a hydronic heating system. 1 leaked at the stem right away. 3 others over the course of the following week. That resulted in 2 call back trips.
The pricing is good, and I will probably use them again. I will take the time to tighten every packing nut prior to installation.

Reviewed by 20 customers

Sort by

Displaying reviews 1-10

Back to top

Previous | Next »

5/10/2012
 
5.0

Great product

By Zimmy

from oakland md

Verified Buyer

Comments about 1-1/4" Full Port Sweat Ball Valve:

Simple to install easy to work

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

5/4/2012
 
5.0

Great Quality

By RubleJ

from Frankfort, KY

Verified Buyer

Comments about 3/4" Full Port Sweat Ball Valve:

I was first concerned that the quality might have been sacrificed because of the price difference in what I was used to paying, but that is not that case at all. These valves were of the same grade as the high dollar ones at the local big box outlet.

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

2/14/2012
 
5.0

GOOD PRODUCT AT A GREAT PRICE

By THE RED DRAGON

from KING OF PRUSSIA, PA.

Verified Buyer

Comments about 3/4" Full Port Sweat Ball Valve:

USED IN COLD AND HOT WATER FEED LINES TO FACILITATE WORKING ON HEATER SYSTEM.
EASY TO INSTALL AND EASY TO OPERATE.

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

1/11/2012
 
5.0

Looks great,bought the product for stock

By Joe Bilden

from New York

Verified Buyer

Comments about 3/4" Full Port Sweat Ball Valve:

Valve looks like it closes nice and tight, many valves today are very loose.

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

12/15/2011
 
5.0

great ball valve

By Kell

from Hillsboro, OR

Verified Buyer

Comments about 3/4" Full Port Sweat Ball Valve:

same quality as my other plumbing supplier, but less expensive at pex supply

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

11/28/2011
 
5.0

Excellent ball valve.

By Sean A

from Sayreville, NJ

Verified Buyer

Comments about Hydrovalve 1/2" Full Port Sweat Ball Valve:

Sweat it in the open position and don't work it till it has cooled. Repeat were old leaky gate valves are found.

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

11/25/2011
 
5.0

Once again

By jaoneill

from northern ny

Verified Buyer

Comments about Hydrovalve 1-1/2" Full Port Sweat Ball Valve:

item was shipped promptly and received as expected.

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

11/16/2011
 
5.0

Great product, Great price

By Mike

from Northern Illinois

Verified Buyer

Comments about Hydrovalve 1/2" Full Port Sweat Ball Valve:

Great quality valve, not like the box store junk!

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

4/29/2011
 
5.0

great buy

By Cletus the slak jawed yokel

from Carbondale, IL

Verified Buyer

Comments about Hydrovalve 2" Full Port Sweat Ball Valve:

I bought two for less than the price of one at a local big box store.

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

4/25/2011
 
4.0

best price

By Joe

from new york

Verified Buyer

Comments about Hydrovalve 1/2" Full Port Sweat Ball Valve:

I would recommend best price [...]

Bottom Line Yes, I would recommend this to a friend

Was this review helpful? Yes / No

 - You may also flag this review

Displaying reviews 1-10

Back to top

Previous | Next »

Q&A: Ask the Questions, share answers

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

4 Questions | 8 Answers
Displaying questions 1-4
  • Hydrovalve 1/2" Full Port Sweat Ball Valve

    Q:

    Is this valve compatible with glycol systems using 50/50 mix @ 95C
    Asked on 3/21/2012 by R

    5 answers

    • CUSTOMER CARE

      A:

      It should be. Glycol is pretty friendly to the parts in this valve
      David

      Answered on 3/23/2012 by Another PexSupply Customer

    • VERIFIED BUYER

      A:

      I have used these valves in my house, they are good enough for my purpose.They can be used for water, gases, and oils, this one is 1/2" in and 1/2" out and you need to solder (sweat) it in place. Its brass and good for 600psi.. This is probably good enough for your application, but you need to find out what is the constant temp rating of the valve. I would use a valve that can handle twice as much as I am putting thru it, and go with a threaded valve, if its for industrial application s, for ease of r&r, and   s /s,  just because it will take on more abuse and has higher operating specs.  
      The best thing for you to do is to contact the valve manufacture and ask them for the valve spcs. The valve manufacturer along with your glycol producer should be the ONLY ones you should consult regarding what fluids and what type of valves/pumps etc, are compatible with each other.
      If this is an established business/ operation, why don't you just take the valve mfg # and serial # ( if theres one) and replace it with a propper replacement or an approved alternative?
      R.R.

      Answered on 3/21/2012 by Another PexSupply Customer

    • VERIFIED BUYER

      A:

      Thats a mixed answer.... the short answer is yes.....
      However all systems that have gl in them will more that likely start to leak in places that would not leak in water only systems.
      Flush and clean the system before adding the glycol....proceed w/ caution.
      kpc

      Answered on 3/21/2012 by Another PexSupply Customer

    • VERIFIED BUYER

      A:

      I would expect it is, I have never known a valve to not be compatible
      with glycol. I would guess the soldering process is hotter to the seal
      than glycol temperatures can reach. I have serviced glycol solar systems
      for 30 years. Your customer can contact me directly.

      Answered on 3/21/2012 by Another PexSupply Customer

    • VERIFIED BUYER

      A:

      I use similar valves at near boiling temperatures with tap water.

      Answered on 3/21/2012 by Another PexSupply Customer
  • 3/4" Full Port Sweat Ball Valve

    Q:

    Can you use this type of valve in a baseboard hot water feeding application, or is that too much heat..?
    Asked on 10/24/2011 by D from NH

    1 answer

    • CUSTOMER CARE

      A:

      This valve can handle the heat in baseboard applications, but it is not recommended for steam.

      Answered on 11/3/2011 by PexSupply Staff from NY
  • Hydrovalve 1/2" Full Port Sweat Ball Valve

    Q:

    DO YOU MAKE A 1/2 INCH BALL VALVE READY FOR PEX PIPE AND RING WITH A BLEEDER FEATURE TO BACK DRAIN WATER?

    SAM RIO
    Asked on 3/22/2011 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      We do not. You would need to buy a ball valve with a drain and add PEX adapters to the ball valve.

      Answered on 3/25/2011 by PexSupply Staff from NY
  • 3/4" Full Port Sweat Ball Valve

    Q:

    What does the WOG stand for?
    Asked on 10/22/2010 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      WOG is an abbreviation for water, oil, gas pressure rating. It represents the maximum allowed pressure under normal ambient temperature conditions.

      Answered on 10/25/2010 by PexSupply Staff from NY
Displaying questions 1-4

Do you have a question about this product? 

Free Shipping on orders over $300

You May Also Want

PexSupply.com Logo

Join Our Mailing List - Sign up and receive special offers and coupons

Nextag Seller PriceGrabber User Ratings for Pex Supply PHCC BBB Reliability Seal
HACKER SAFE certified sites prevent over 99.9% of hacker crime. Facebook Twitter Youtube