Enter your e-mail address below to have your password reset. You will receive an e-mail with a new temporary password in it.
Your new password is on its way. If you have problems accessing your account, please contact us at 1-888-757-4774 and we'll help you out.
I'm sorry, your e-mail was not found in our system.
If you think this is a mistake, please contact customer service at 1-888-757-4774 or via e-mail here.
Sign in to access your account and complete your order.
You will have the option to create an account on the order confirmation page.
Installation accessories are the items needed to aid in the installation of PEX Tubing for PEX Plumbing systems.
Plastic Bend Supports provide rigid 90-degree bend for PEX Tubing. The Bend Supports are made of glass-reinforced nylon. These may be used in PEX Plumbing Systems.
Metal Bend Supports provide a rigid 90-degree bend for PEX Tubing. These Bend Supports are zinc-plated and may be used in PEX Plumbing Systems.
Tube Talons connect PEX Tubing to wood surfaces. They can be used for PEX Plumbing Applications. These PEX talons are also referred to as J-hooks.
Economy PEX Clamps nail or screw in place to hold PEX Tubing securely.
Chrome Finishing Sleeve slides over 3/8" and 1/2" Uponor Wirsbo AQUAPEX tubing connected to point-of-use valve to provide protection and improve appearance.
Plastic and metal drop ear bend supports provide rigid 90-degree bend and connection free stub out from a stud wall or floor for 3/8" or 1/2" PEX tubing.
These suspension type PEX tubing fasteners can be used to support PEX tubing hanging below joists or to isolate tubing passing through joists from abrasion.
Escutcheons are used to provide a clean finished look where PEX Tubing or stub-outs are exiting the wall at a fixture location. Escutcheons are available in white, plastic, and chrome.
Steel Plate Protector protects tubing from possible damage by drywall, trim screws or nails, etc.
Straight-through Supports Straight-through Support provides rigid straight-through support for 1/2" tubing as it exits the floor.
Red Palm and Brown Work Gloves
These suspension type tubing hangers can be used to isolate tubing passing through joists from abrasion. Fits 1-3/8" hole.
Nylon bundle ties allow multiple lines of PEX Tubing to be held together keeping the installation neat and secure. PipethonTM Straps are ideal for bundling manifold distribution lines.
This category contains PEX Routing material manufactured by EZ Route, needed to make routing installations quick and easy. Ideal for in-floor radiant heating and domestic water supply where a stable self supporting base is needed. Designed for routing 1/2", 5/8" or 3/4" tubes in unison. It is shipped as a 12 channel system, which can simply be cut down to your job specifications. Includes EZ Route Premier, EZ Route Radius and EZ Route Straight, which can be used with the Premier or the Radius.
PEX-a Pipe Support is a non-combustible, self-gripping, galvanized-steel channel for crosslinked polyethylene (PEX-a) pipe. It provides continuous, uninterrupted support of PEX-a pipe, allowing hanger placement similar to that of metallic pipe.
PEX Installation Parts are the accessories needed to install PEX tubing in plumbing applications. These include tube talons for PEX Supports, Clamps & Fasteners, and PEX Protectors.
Plastic bend supports and Metal bend supports provide a simple solution for making a 90 degree turn with PEX tubing.
A Drop Ear Bend Support simultaneously provides a rigid 90 degree bend and connection free stub-out from a stud wall or floor.
A Straight-through A Support provides a rigid straight support for 1/2" PEX tubing as it exits a floor.
EZ Route PEX Routing is designed for routing 1/2", 5/8" or 3/4" PEX in unison.
Clamps & Fasteners
PEX Tube Talons connect PEX tubing to wood surfaces. PEX Tube Talons allow an installer to secure tubing to subfloors, wood joists, and studs. It can be used to secure tubing in either horizontal or vertical PEX pipe runs.
Suspension Clip Tubing Fasteners support PEX tubing hanging below joists. These rubber accessories may also be used to isolate tubing passing through joists.
Economy PEX Tubing Clamps are plastic fasteners that are nailed or screwed into place to hold PEX tubing securely in place.
Bundle Ties allow multiple lines of PEX Tubing to be held together keeping the installation neat and secure. Pipethon plastic straps are ideal for bundling manifold distribution lines.
Chrome Sleeves slide over 3/8" or 1/2" PEX tubing that is connected to a point-of-use valve. This provides protection and a professional appearance. Each finishing sleeve is 4" long and chrome plated.
Steel Plate Protectors defend PEX from possible damage by drywall, trim screws, or nails, etc.
Tubing Insulators are plastic polymer insulators used to suspend and insulate PEX tubing that pass through metal studs, joists, and wood. They protect and support PEX tubing, and can also be used to isolate PEX from abrasion when passing through joists.
Escutcheons are flat metal accessories that protect and decorate PEX tubing or stub-outs exit a wall. They provide a clean finished look at fixtures where PEX tubing or stub-outs protrude from the wall.
Subscribe to our Channel
Like Us on Facebook
Visit Our Blog
At PexSupply.com, our goal is to bring you the highest quality plumbing, heating and HVAC supplies at competitive prices. Our product catalog includes PEX Plumbing Supplies, Radiant Heat Supplies, VisionPro Honeywell Thermostats, Taco pumps and mini-split air conditioners. If there are items you are looking for but can't find on our website, please contact our Customer Service Representatives & we will do our best to find what you need.
© 2013 PexSupply.com