Zoom

1" (FIP x Male Union) Steam Angle Radiator Valve

SKU:BARVY-1000

Brand: Matco-Norca

1" (FIP x Male Union) Steam Angle Radiator Valve
Qty	Price
	$12.95 / each

In Stock! Ships in 24-48 Hours

25 Available

Specs

Product Specs
Size:	1"
Body Pattern:	Angle
Material:	Brass
Application:	Heating
Max PSI: ? Max PSI close Max PSI is the maximum amount of pressure per square inch that can be tolerated.	60 psi
Type:	Steam Angle Radiator Valve
Thread Type:	Male
	Female

Description for Matco-Norca BARVY-1000

1" (FIP x Male Union) Steam Angle Radiator Valve

REVIEW SNAPSHOT®

by PowerReviews

Matco-Norca 1/2" (FIP x Male Union) Steam Angle Radiator Valve

4.8

(based on 6 reviews)

100%

of respondents would recommend this to a friend.

Pros

Cons

Best Uses

- Primary use:
- Business (3), Personal (3)

Reviewed by 6 customers

Sort by

Displaying reviews 1-6

1/26/2012

5.0

Brilliant, absolutely no doubt

By Joe the Plummer

from Denver

Pros

Cons

Best Uses

Comments about Matco-Norca 1-1/4" (FIP x Male Union) Steam Angle Radiator Valve:

Best price around by far, high quality, delivered as promised

10/21/2011

4.0

WHY PAY MORE

By hooty12

from Steeler Country!

Pros

Cons

Best Uses

Comments about Matco-Norca 1/2" (FIP x Male Union) Steam Angle Radiator Valve:

Works fine, No problems installing them.

11/11/2010

5.0

Basic radiator valve

By David Sorkin

from North Plainfield, NJ

Pros

Cons

Best Uses

Comments about Matco-Norca 1" (FIP x Male Union) Steam Angle Radiator Valve:

Basic radiator valve at a good price. I used these to replace the valve + spud on two steam radiators in my house that were leaking. Removing the spud from the radiator can be difficult. I remove it by inserting a 3/4" nipple to prevent it from crushing and then using a 3' pipe wrench. You need a spud wrench to install the new one back into the radiator. I use teflon paste on the female threads and tape on the male threads.

11/8/2010

5.0

I recommend this product

By The great 48

from St Paul, MN

Pros

Cons

Best Uses

Comments about Matco-Norca 1/2" (FIP x Male Union) Steam Angle Radiator Valve:

I used this angle valve to connect to a Runtal towel radiator. The valve works great.

8/12/2010

(1 of 1 customers found this review helpful)

5.0

Good find Good Price

By Tim

from Cape Girardeau, MO

Pros

Cons

Best Uses

Comments about Matco-Norca 3/4" (FIP x Male Union) Steam Angle Radiator Valve:

This is a 3/4" by 3/4" radiator valve found on most older radiators. The male nipple can be removed. Could not find locally [...] even went to a specailty plumbing/HVAC store that sells radiators with a leaking valve so they could see it and they told me they don't make those valves anymore. Purchased 6 for apartment complex and all were good. Thanks PEX.

8/5/2010

5.0

Great product

By filbertson

from Pennsylvania

Pros

Cons

Best Uses

Comments about Matco-Norca 1/2" (FIP x Male Union) Steam Angle Radiator Valve:

Used in steam systems - excellent material - well made valve design - NOT a cheap [*]model

Displaying reviews 1-6

Q&A: Ask the Questions, share answers

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

6 Questions | 6 Answers

Displaying questions 1-6

Matco-Norca 1-1/4" (FIP x Male Union) Steam Angle Radiator Valve
Q:
how do you measure pipe on the od or id
Asked on 10/18/2011 by wayne not a plummer from ohio
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  Pipe used for plumbing and heating is sized by the ID.
  Answered on 10/19/2011 by PexSupply Staff from NY
Matco-Norca 1" (FIP x Male Union) Steam Angle Radiator Valve
Q:
Is there any reason that these shouldn't be used for a hot water radiator?
Asked on 8/31/2011 by Anonymous
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  No there is not. These valves should work in that application without any issues.
  Answered on 9/6/2011 by PexSupply Staff from NY
Matco-Norca 1-1/4" (FIP x Male Union) Steam Angle Radiator Valve
Q:
What is the thread size of the tailpiece, is it the same as the valve body (inlet).?
Asked on 2/22/2011 by dave from belmar nj
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  Yes, they are both 1 1/4".
  Answered on 2/22/2011 by PexSupply Staff from NY
Matco-Norca 1-1/4" (FIP x Male Union) Steam Angle Radiator Valve
Q:
is the nipple removeable?
Asked on 12/7/2010 by john
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  No, it is not removable--it is part of the unit.
  Answered on 12/8/2010 by PexSupply Staff from NY
Matco-Norca 1" (FIP x Male Union) Steam Angle Radiator Valve
Q:
Hello,
Do you sell rebuild kits for steam valve ie; rubber/teflon washer that goes inside?
regards
Carl
Asked on 10/28/2010 by Carl from Oakland CA
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  We don't carry rebuild kits for these steam valves. Matco-Norca does not make such kits.
  Answered on 11/5/2010 by PexSupply Staff from NY
Matco-Norca 3/4" (FIP x Male Union) Steam Angle Radiator Valve
Q:
need data sheet.looking for dimensions
Asked on 10/11/2010 by bob from long island
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  Dimensions, as well as other technical specifications, can be found in this document: http://s3.pexsupply.com/manuals/1286916824154/40442_PROD_FILE.pdf
  Answered on 10/15/2010 by PexSupply Staff from NY

Displaying questions 1-6

Do you have a question about this product?

You May Also Want

View Specs

Specifications
close

Product Specifications
Size: 1-1/4"

View Product Detail

Matco-Norca BARVY-1250 - 1-1/4" (FIP x Male Union) Steam Angle Radiator Valve
$19.65
View Specs

Specifications
close

Product Specifications
Size: 3/4"

View Product Detail

Matco-Norca BARVY-0750 - 3/4" (FIP x Male Union) Steam Angle Radiator Valve
$10.85

Product Specifications
Size:	1-1/4"

Product Specifications
Size:	3/4"

View Specs

Product Specifications
Application:	Radiator Vent
Size:	1/8"
Type:	Float-type Vent
System Type:	Steam
Max Pressure:	10 psig
Max Operating Pressure:	6 psig
Mount:	Angle
Adjustability:	Non-Adjustable
Material:	Steel

Hoffman 401440 - 40, 1/8" Angle Steam Radiator Air Valve

$12.95

View Specs

Specifications
close

Product Specifications
Size: 1"

View Product Detail

Matco-Norca ENT-100 - 1" (FIP x Male Union) Radiator Union Elbow
$9.39

Air Eliminators	Nipples
Air Valves	Pipe Insulation
Aquastats & Wells	Pressure Valves
Baseboard Heaters	Pumps & Flanges
Boilers	Radiant Heat
Expansions Tanks	Radiator Valves
Fittings	Relief Valves
Flow Controls Valves	Switching Relays
Flow Switches	Tekmar Controls
Gas Valves	Temperature Controllers
Gauges	Thermocouples
Heating Specialties	Thermostats
Kickspace Heaters	Transformers
Low Water Cutoffs	Water Feeders
Mixing Valves	Zone Valves & Controls

Access Doors	PEX Plumbing
Backflow Preventers	Plumbing Specialties
Chemicals & Compounds	Pumps
Expansion Tanks	Solder
Faucets & Sinks	Stops & Risers
Fittings	Tools
Flush Valves	Toilet Parts
Grease Traps	Tub & Shower Products
Outlet Boxes	Tubular Goods & P-Traps
Nipples	Valves
Pipe Hangers	Water Filters
Pipe Insulation	Water Heaters

Air Cleaners	HVAC Controls
Air Conditioners	Line Sets
AC Install Parts	Mini-Split Air Conditioners
Condensate Pumps	Replacement Parts
Dampers	Registers & Grilles
Dehumidifiers	Replacement Filters
Filter Driers	Thermostats
Flex Duct	Tools
Humidifiers	Ventilation Fans

Project Help

Project Help

Project Help

Forgot Your Password?

Returning Customers – Sign In

Checkout as a Guest

1" (FIP x Male Union) Steam Angle Radiator Valve

Returns & Exchanges

Shipping Information

Lowest Price Guarantee

MAP Price

Security 100% Guaranteed

Privacy

CVV Code

Specs

Max PSI

Description for Matco-Norca BARVY-1000

1" (FIP x Male Union) Steam Angle Radiator Valve

Q&A: Ask the Questions, share answers

You May Also Want

Specifications

Specifications

Specifications

Specifications

Product Zoom

Video

Join Our Mailing List - Sign up and receive special offers and coupons