Enter your e-mail address below to have your password reset. You will receive an e-mail with a new temporary password in it.
Your new password is on its way. If you have problems accessing your account, please contact us at 1-888-757-4774 and we'll help you out.
I'm sorry, your e-mail was not found in our system.
If you think this is a mistake, please contact customer service at 1-888-757-4774 or via e-mail here.
Sign in to access your account and complete your order.
You will have the option to create an account on the order confirmation page.
PEX Plumbing Manifolds should be used to ease the installation of PEX Plumbing systems. In a PEX plumbing system, the manifold/s will act as a hub for water transportation. These manifolds include the Manabloc manifold system, Wirsbo Aquacenter manifolds, and copper manifolds. Be sure to select the right fittings and adapters to go along with these manifolds.
The MANABLOC system provides a home-run distribution manifold for a plumbing system. The MANABLOC features 3/8" and 1/2" connections in crimp, press, and compression styles. Supply - Return Adapters or Caps must be purchased separately. MANABLOCs come pre-assembled and include port connections, drill templates, instruction guide, faceplate and port labels. However you will still need to purchase mounting brackets, supply adapters, and a supply cap. Standard set-up requires two supply adapters (1 for hot, 1 for cold) and one supply end cap. The Supply Adapters are available in crimp, threaded, or press connection types.
This category contains 1" copper crimp valved manifolds (type "L" copper) featuring 1/2" crimp outlets and a soldered valve connection allowing for simple and easy isolation of individual loops, as well as HydroPEX crimp copper manifolds - 1" valveless copper manifolds featuring 1/2" barbed PEX outlets and 3/4" barbed inlets.
ProPEX style manifolds include ProPEX copper manifolds (1" copper valved manifolds, type "L" copper, featuring 1/2" ProPEX outlets and a soldered valve connection allowing for simple and easy isolation of individual loops), plastic valveless manifolds (includes Aquacenter EP Flow-Through Manifolds and EP Branch Manifolds), and Aquacenter valved manifolds (available with three or four NPSM or ProPEX outlets and made from EP, making it suitable for hot and cold-water distribution systems).
This category contains PEX Press Copper Manifolds with zero lead, including ProPress Copper Manifolds, ProPress Copper Manifold Valves, PEX Press Brazed Copper Manifold-Header and PEX Press Brazed Copper Manifolds both male and female.
Installing a compression manifolds requires no PEX tools. In this category you will find Sharkbite and Sioux Chief compression manifolds. Manifolds are traditionally used in PEX systems, but the SharkBite manifolds found here will allow easy incorporation into copper or CPVC systems. Use SharkBite push fittings to install these manifolds anywhere in a plumbing system. All manifolds have a 1" trunk with 3/4" tube inlets & outlets and 1/2" push-fit ports (2" on center). The Sioux Chief compression manifolds found here come equipped with balancing valves.
This category contains 1" Type L Copper Manifolds with 1/2" Sweat Loops and various outlets.
This category contains PEX Press Plastic Manifolds with Zero Lead and Smart Connect Feature.
A manifold is the hub of a plumbing system that distributes supply water to distribution lines throughout a home. PEX manifolds are easy to install and are growing in popularity throughout the United States. There are a variety of PEX manifold systems available. Each manifold system has a variety of adapters, end caps, and fitting assemblies that can be purchased to customize the manifold to various applications.
MANABLOC PEX Plumbing System
Viega MANABLOCs are available in compression, crimp, and PEX press styles. Each of these utilizes 1/2", 3/8", or a combination of both for port outlets. Each MANABLOC is pre-assembled and includes port connections, drill templates, and a faceplate. However, mounting brackets, supply adapters, and caps must be purchased separately. Standard setup requires two supply adapters (one for hot and one for cold) and one supply end cap. To avoid purchasing an expensive PEX tool, a compression style MANABLOC is recommended.
ProPEX Style Manifolds
Uponor (Wirsbo) ProPEX manifolds require the Milwaukee ProPEX expander tool and ProPEX rings for securing connections to PEX tubing. ProPEX manifolds are available in copper and engineered plastic (EP) configurations. EP manifolds are an economic alternative to copper manifolds but are just as effective. These manifolds are available from 3 to 12 outlets and in valved and valveless models.
ProPEX copper manifolds feature a 1" copper supply constructed of type "L" copper. These copper manifolds are available with or without stop valves. ProPEX stop valves allow the ability to isolate individual loops without shutting down the entire system.
The engineered plastic (EP) heating manifold by Uponor (Wirsbo) is similar to its brass counterpart. EP radiant heat manifolds are constructed of high-performance thermoplastic. It is suitable for use under conditions of high impact, heat, and moisture. They are resistant to corrosion, pitting, scaling, high chlorine levels and ultraviolet light. EP radiant heat manifolds are an economic alternative to expensive copper, brass and stainless steel manifolds.
SharkBite Compression Manifolds
Manifolds are traditionally used in PEX systems, but SharkBite manifolds allow easy incorporation into copper or CPVC systems. These manifolds contain a 1" trunk with 3/4" tube inlets and outlets. Loop ports are equipped with 1/2" SharkBite couplings to connect to 1/2" distribution lines. SharkBite manifolds provide an alternative to purchasing an expensive PEX tool.
Crimp Style Manifolds
Copper crimp manifolds feature a 1" copper supply constructed of type "L" copper. Crimp manifolds require the crimp tool and crimp rings for securing connections to PEX tubing. These manifolds are available in a valve or valveless configurations. Valved models contain valves at each loop, which provides the ability to isolate different lines. This is especially useful when a leak or necessary repair is required. Crimp ball valves can be manually added to valveless manifolds if desired.
PEX Press Copper Manifolds
Viega PEX Press manifolds require a press tool to connect to copper connections. ProPress manifolds are compatible with type K, L and M copper tubing only. ProPress copper manifold valves can be connected to loop outlets to create a valved manifold.
Subscribe to our Channel
Like Us on Facebook
Visit Our Blog
At PexSupply.com, our goal is to bring you the highest quality plumbing, heating and HVAC supplies at competitive prices. Our product catalog includes PEX Plumbing Supplies, Radiant Heat Supplies, VisionPro Honeywell Thermostats, Taco pumps and mini-split air conditioners. If there are items you are looking for but can't find on our website, please contact our Customer Service Representatives & we will do our best to find what you need.
© 2014 PexSupply.com