Enter your e-mail address below to have your password reset. You will receive an e-mail with a new temporary password in it.
Your new password is on its way. If you have problems accessing your account, please contact us at 1-888-757-4774 and we'll help you out.
I'm sorry, your e-mail was not found in our system.
If you think this is a mistake, please contact customer service at 1-888-757-4774 or via e-mail here.
Sign in to access your account and complete your order.
You will have the option to create an account on the order confirmation page.
Installation accessories include the items needed to install PEX Tubing for Radiant Heat Systems. These include tube talons for PEX Tubing, Bend Supports for PEX Tubing, and several Radiant Heat Books.
Tube Talons connect PEX Tubing to wood surfaces. These tube talons can be used for PEX Tubing in Radiant Heat Applications.
Plastic, PVC, and metal PEX bend supports for Radiant Heat Installations. These bend supports allow you to make easier turns with PEX Tubing. The PVC Bend Supports are designed specifically for PEX Tubes that are exiting a slab in a radiant heat installation.
PEX Clips attach PEX Tubing to under the wood subfloor for joist radiant heating applications. This is a suspended pipe style of radiant heat system. Drywall screws can be used to attach the PEX Clips.
Wirsbo PEX Rails secure PEX Tubing to concrete floors and wood subfloors. These PEX rails are not designed for joist heating applications.
Specially formulated 6-inch galvanized steel alloy tie secures Uponor Wirsbo PEX tubing products to wire mesh or rebar. Zip ties may also be used to attach PEX tubing to a wire mesh.
Straight-through Support provides rigid straight-through support for 1/2" tubing as it exits the floor.
Use Stand-up Brackets in commercial multi-floor construction only. Secure the brackets to the deck form. Then install the 1/2" PEX tubing in the brackets, either with the 1/2" PEX tubing alone or with the 1/2" tubing sleeved inside a corrugated polyethylene carrier tube.
Steel Plate Protector protects tubing from possible damage by drywall, trim screws or nails, etc.
Clips for fastening 1/2" and 5/8" tubing to wire reinforcing mesh in concrete pours.
Nylon clips screw in place and tubing snaps in. Clips flex to hold ViegaPEX tubing securely. Offered in single and double models.
This category contains several PRESSURE PAL mini-feeders that are compatible with both water and glycol/water solutions. They are perfect for small boiler/chiller systems, snow/ice melt circuits, outside air heating/cooling glycol coils, and solar heating systems.
This category contains the PEX-Pal - a tubing collector and organizer for radiant heating in-floor installations. The modular two channel design positions the supply and return pipes at the correct spacing required for connection to the manifolds.
This category contains PEX Routing material manufactured by EZ Route, needed to make routing installations quick and easy. Ideal for in-floor radiant heating and domestic water supply where a stable self supporting base is needed. Designed for routing 1/2", 5/8" or 3/4" tubes in unison. It is shipped as a 12 channel system, which can simply be cut down to your job specifications. Includes EZ Route Premier, EZ Route Radius and EZ Route Straight, which can be used with the Premier or the Radius.
No-Freez, the most trusted name in non-toxic anti-freeze. A chemically balanced inhibited solution engineered to give worry-free protection. Provides expansion point protection to -100°F. Systems will flow to 61°F.
Radiant heat installation parts are the accessories needed to install PEX tubing in radiant heat systems. These include Clamps & Fasteners, PEX Supports, PEX Organizers, PEX Protectors, and Glycol Feeders.
Clamps & Fasteners
PEX Tube Talons connect PEX tubing to wood surfaces. PEX Tube Talons allow an installer to secure tubing to subfloors, wood joists, and studs. It can be used to support tubing for both horizontal and vertical PEX pipe runs, and is compatible with various PEX sizes.
PEX Clips attach PEX tubing to under the wood subfloor for joist radiant heating applications. Drywall screws can be used to secure the PEX clips.
Fixing Wire & Zip Ties secure PEX tubing to wire mesh or rebar in concrete pour applications.
Wire Mesh Clips fasten 1/2" and 5/8" tubing to wire mesh in concrete pour applications.
Snap Clips can be mounted to almost any surface and may be rotated 360 degrees. Snap clips can be used with PEX, copper, and CPVC pipes and can support both vertical and horizontal runs of tubing.
Plastic, PVC, and Metal PEX Bend Supports provide 90 degree turns when using PEX tubing. PVC bend supports are specifically designed for PEX exiting a slab application.
Stand-up Brackets create 90 degree vertical bends. These supports can be used with PEX as large as 1" in commercial multi-floor or residential slab construction.
Straight-through Supports provide a rigid straight support for 1/2" PEX tubing as it exits a floor.
Tubing Organizers position supply and return pipes at the correct spacing required for connection to the manifolds. 5/16" to 3/4" PEX are compatible with these organizers.
PEX Rails secure PEX Tubing to concrete floors and wood subfloors. PEX rails are not designed for joist heating applications. They are used for applications in thin and regular concrete slabs from 1-1/2" to 5" thick.
EZ Route PEX Routing is designed for routing 1/2", 5/8" or 3/4" PEX in unison.
Steel Plate Protectors defend PEX from possible damage by drywall, trim screws, or nails, etc.
Glycol Feeders automatically add glycol solution to make up for leakage in closed loop water systems. This ensures pressure is maintained even when leakage occurs. PRESSURE PAL mini-feeders are designed for radiant heat systems, large cooling systems, snow melt systems, and home boilers, and are compatible with both water and glycol/water solutions.
Subscribe to our Channel
Like Us on Facebook
Visit Our Blog
At PexSupply.com, our goal is to bring you the highest quality plumbing, heating and HVAC supplies at competitive prices. Our product catalog includes PEX Plumbing Supplies, Radiant Heat Supplies, VisionPro Honeywell Thermostats, Taco pumps and mini-split air conditioners. If there are items you are looking for but can't find on our website, please contact our Customer Service Representatives & we will do our best to find what you need.
© 2014 PexSupply.com