Zoom

Two Stage Temperature Control w/ Sensor (24V Input, 0-10V Output)

SKU:ETC-212100-000

Brand: Ranco

Two Stage Temperature Control w/ Sensor (24V Input, 0-10V Output)
Qty	Price
	$123.95 / each

Usually Ships in 7-10 Days

Shipping Info

Easy Returns

Specs

Product Specs
Application:	Remote Bulb Temperature
Temperature Range:	-30° to 220°F
Differential: ? Differential close Differential refers to the temperature range that is allowed. For example, a boiler set to 140 degrees with a 5 degree differential can have an actual temperature anywhere between 135 and 145.	1° to 30°F
Voltage: ? Voltage close Voltage, or volts, is a measurement of the difference between two electric fields (in heating terms, the difference between the Earth's electrical field and the electricity running through your wires).	24v
Sensor Type:	Thermistor
Bulb Size:	2" x 1/4"
Capillary Length:	8'
Operating Temp Range:	-20° to 140°F
Enclosure Type:	Nema 1
Height:	6.52"
Width:	2.7"
Depth:	2.48"
Switch Action:	SPDT
Humidity Range:	0 to 95% RH (Non Condensing)
Stages: ? Stages close Stages describes the number of heat or cool sources that you need to control with a single thermostat.	2
Output:	0 to 10v

Digital Display

Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.
When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized.

Remote Temperature Sensing

The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

Built-In Safety

Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is.
The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function.