Norton Hot Surface Ignitor (271N) Zoom

Norton Hot Surface Ignitor (271N)

SKU:41-408

Brand: Robertshaw

Robertshaw
Qty Price
$19.95
/ each
$95.75 / box (5 units x $19.15)
In Stock! Ships in 24-48 Hours
98 Available

Description for Robertshaw 41-408

Robertshaw's 41-400 Series Norton Hot Surface Ignitors deliver dependable ignition heating systems of every description. From furnaces and boilers to rooftop heaters, infrared burners, unit heaters, water heaters, and many other types of HVAC equipment.
The 41-400 Series Hot Surface Ignitors are made of high purity recrystalized silicon carbide which combines physical and thermal strength with stable electrical properties. The 41-400 Series are designed to reach ignition temperatures within 17 seconds. These Hot Surface Ignitors have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity. The lead wires are also enclosed with a special high-temperature fiberglass insulation providing total electrical protection.
Note: All 41-400 series ignitors are 120 VAC models. Some hot surface modules are rated for 208/240 volts input, however they step the voltage down to 120 VAC.
Specifications

  • Ceramic Block Style: B, 1-1/4" wide
  • Terminal Connector Type: C
  • Lead Wire Length: 4-1/2"

Norton Hot Surface Ignitor (271N)

REVIEW SNAPSHOT®

by PowerReviews
RobertshawNorton Hot Surface Ignitor (271N)
 
4.7

(based on 23 reviews)

Ratings Distribution

  • 5 Stars

     

    (18)

  • 4 Stars

     

    (4)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

    Cons

      Best Uses

          • Primary use:
          • Personal (21)

        Most Liked Positive Review

         

        Works as advertised

        You hate to spend money on these things but your furnace won't work without it. Buy two and store one where you can find it. Your furnace lasts 20-30 years. These seem to...Read complete review

        You hate to spend money on these things but your furnace won't work without it. Buy two and store one where you can find it. Your furnace lasts 20-30 years. These seem to burn out every 4-5 years and they always seem to die on the coldest morning of the winter, especially when it occurs on a Sunday or a holiday. They can be hard to find locally and they will be expensive when you do find them.

        VS

        Most Liked Negative Review

         

        great price [...]

        great price for this product - costs twice as much at local retail outlets[...]

        great price for this product - costs twice as much at local retail outlets[...]

        Reviewed by 23 customers

        Sort by

        Displaying reviews 1-10

        Back to top

        Previous | Next »

         
        5.0

        You should always have a spare

        By Steve DIY

        from Westminster Colorado

        Verified Buyer

        Pros

          Cons

            Best Uses

              Comments about Norton Hot Surface Ignitor (271N):

              These Hot Surface Ignitors always break on the weekend. I always keep a spare on hand and avoid the service call. It takes less than five minutes to replace these things.

              • Primary use:
              • Personal
               
              4.0

              Quick service, working product

              By Aaron

              from Indiana

              Verified Buyer

              Pros

                Cons

                  Best Uses

                    Comments about Norton Hot Surface Ignitor (271N):

                    My ignitor burned out during a 20 degree cold snap. Ordered this one from Pex and it arrived very quickly. This was also the cheapest place I could find an ignitor for my furnace.

                    I have to replace the heat sensor before next winter and I'm definitely going to use Pex again.

                    • Primary use:
                    • Personal
                     
                    5.0

                    They make shopping a breeze

                    By sl6ick

                    from Phila. Pa.

                    Verified Buyer

                    Pros

                      Cons

                        Best Uses

                          Comments about Norton Hot Surface Ignitor (271N):

                          The ignitor fit the bill,it was priced to my liking and the timely arival was great.

                          • Primary use:
                          • Personal
                           
                          5.0

                          Perfect Match!!!

                          By Homeowner

                          from Virginia

                          Verified Buyer

                          Pros

                            Cons

                              Best Uses

                                Comments about Norton Hot Surface Ignitor (271N):

                                Perfect replacement part and is working great. I have bookmarked this website for future parts.

                                • Primary use:
                                • Personal
                                 
                                5.0

                                GREAT FURNACE REPLACEMENT PARTS...

                                By JEFF S.

                                from Orland Park, IL

                                Verified Buyer

                                Pros

                                  Cons

                                    Best Uses

                                      Comments about Norton Hot Surface Ignitor (271N):

                                      Plugged right in & snapped in place. Easy installation....

                                      • Primary use:
                                      • Business
                                       
                                      5.0

                                      Awesome price ! Great service ! OEM part

                                      By Gasguy

                                      from Seattle, Wa

                                      Verified Buyer

                                      Pros

                                        Cons

                                          Best Uses

                                            Comments about Norton Hot Surface Ignitor (271N):

                                            Quick order process 4 day delivery,excellent service, 5 min installation. Great price compared to local retailer, bought extra for future outage & neighborhood repairs.

                                            • Primary use:
                                            • Personal
                                             
                                            5.0

                                            Perfect and cheaper than the repair man!

                                            By Tim the homeowner

                                            from Hyattsville, MD

                                            Verified Buyer

                                            Pros

                                              Cons

                                                Best Uses

                                                  Comments about Norton Hot Surface Ignitor (271N):

                                                  I used this item on my furnace, it was cheaper to purchase this ignitor from Pex Supply than what the repair man wanted to charge. This ignitor works perfectly and was easy to install. I would higly recommend Pex Supply for all of your furnace and AC needs! Pex Supply Rocks!!!! My furnace is ready for the winter, thanks Pex Supply.

                                                  • Primary use:
                                                  • Personal
                                                   
                                                  5.0

                                                  Very pleased with the choices available

                                                  By Pete

                                                  from Loves Park, Illinois

                                                  Verified Buyer

                                                  Pros

                                                    Cons

                                                      Best Uses

                                                        Comments about Norton Hot Surface Ignitor (271N):

                                                        I normally carry spare parts for my furnace like flame sensors and computer boards. I ran out of a hot surface ignitor when the furnace went out during a cold morning (always happens this way). I had to go to my local supply store and purchase another one during my lunch hour. There, it cost me [$] plus tax. Never again. I purchased a spare at Pexsupply for HALF that amount [...]. Definitely do business with these folks, and I'm recommending them to everyone I know.

                                                        • Primary use:
                                                        • Personal
                                                         
                                                        5.0

                                                        great price,[...]exactly as ord

                                                        By Emilee

                                                        from Hell, Michigan

                                                        Verified Buyer

                                                        Pros

                                                          Cons

                                                            Best Uses

                                                              Comments about Norton Hot Surface Ignitor (271N):

                                                              very satisfied, will order from this company again and recommend to others. tyty

                                                              • Primary use:
                                                              • Personal
                                                               
                                                              5.0

                                                              Great Product !!!!

                                                              By Romulus

                                                              from Burtonsville, MD

                                                              Verified Reviewer

                                                              Pros

                                                                Cons

                                                                  Best Uses

                                                                    Comments about Norton Hot Surface Ignitor (271N):

                                                                    After driving and calling around, found a local [...] that wanted [$] + tax for this exact unit. bought here [...].Exact replacement for Trane XE 78 furnace.Working great. Wife happy !!!

                                                                    • Primary use:
                                                                    • Personal

                                                                    Displaying reviews 1-10

                                                                    Back to top

                                                                    Previous | Next »

                                                                    Q&A: Ask the Questions, share answers

                                                                    Do you have questions about this product?

                                                                    get answers from real customers and in-house experts with AnswerBox.

                                                                    1 Question | 1 Answer
                                                                    Displaying question 1
                                                                    • Norton Hot Surface Ignitor (271N)

                                                                      Q:

                                                                      can this model replace norton 271nm( B1401015)?
                                                                      Asked on 12/14/2011 by thi from elk grove CA

                                                                      1 answer

                                                                      • CUSTOMER CARE

                                                                        A:

                                                                        The replacement for 271NM models is part 41-418.

                                                                        Answered on 12/16/2011 by PexSupply Staff from NY
                                                                    Displaying question 1

                                                                    Do you have a question about this product? 

                                                                    PexSupply.com Logo

                                                                    Join Our Mailing List - Sign up and receive special offers and coupons

                                                                    Nextag Seller PriceGrabber User Ratings for Pex Supply PHCC BBB Reliability Seal
                                                                    HACKER SAFE certified sites prevent over 99.9% of hacker crime. Facebook Twitter Youtube