008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP Zoom

008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP

SKU:008-DM-PK

Brand: Taco

Taco
Qty Price
$411.45
/ each
Usually Ships in 7-10 Days
Shipping Info
|
Easy Returns

Specs

Type: Pump Kit
Material: Bronze
Amperage:
?
0.84
Application: Heating
Voltage:
?
115v
Max PSI:
?
125 psi
Horse Power:
?
1/25
Connection Size: 1/2"
Flow Range (GPM): 0-3.6
Head Range (ft.): 0-15
Hertz: 60.0
Phase: 1.0
RPM: 3250
Temperature Range (F): 40° to 230°F
Connection Type: Threaded (IPS)

Description for Taco 008-DM-PK

The Taco D-MAND System is the only recirculating system that operates 24 hours to provide hot water (on demand) at the same time it saves water, energy and money.
The D-MAND System is a small, silent pump that you attach to the hot and cold water lines in the cabinet under the most remote kitchen or bath fixture in the home. When the D-MAND System is activated, the cool water you normally let run down the drain is recirculated back to the water heater through the cold water line.
On demand, the pump circulates hot water from the water heater and returns the cooled water back through the cold water line. When the hot water arrives at the faucet, the D-MAND Systems patented heat sensor and control board shut off the pump to prevent pumping excess hot water into the cold water line.
Runs Only When Activated by the User
Automatically Senses When Water is Hot Enough
Saves Water, Energy and Money
Saves Construction Costs+No new return line needed and no need to drain the system
Simple Installation

008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP

REVIEW SNAPSHOT®

by PowerReviews
Taco008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP
 
4.8

(based on 4 reviews)

Ratings Distribution

  • 5 Stars

     

    (3)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Reviewed by 4 customers

Sort by

Displaying reviews 1-4

Back to top

 
5.0

Product was exactly as described

By Joe the Handyman

from Apex, North Carolina

Verified Buyer

Comments about 008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP:

This pump was easy to install with the supplied t-adapters. Installation took about 30 minutes and it was ready to run. I did have to make an adjustment to the temperature sensor by calling the help line, but it has been performing perfectly ever since. A little pricey for me, but I feel it is worth the cost since I'm no longer wasting water down the drain. My wife loves having hot water the moment she opens the tap.

 
5.0

I highly recoment this product

By S. Anes

from Palm Coast, Fl

Verified Buyer

Comments about 008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP:

The best investment since I've moved to Florida 10 years ago!
Master bathroom, took forever to get hot water, now in a matter of seconds we have HOT Water, what a difference!
Highly recomend this product.
VEry, very happy!
S. Anes -- Palm Coast, Fl

(1 of 1 customers found this review helpful)

 
5.0

Great Product!

By Teddybear

from West Hills, CA

Verified Buyer

Comments about 008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP:

Easy to install by yourself. Everything needed was supplied. Excellent quality throughout. But the best part is never having to run water down the sink again while waiting for the hot water to arrive. Just push the button, head for the shower, and enjoy warm water as soon as you turn it on. Don't know how we ever got along without it!

(1 of 1 customers found this review helpful)

 
4.0

Works as promised

By Bricoleur

from Montreal, QC

Verified Buyer

Comments about 008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP:

It used to take several minutes for hot water to get to my upstairs bathroom, with a lot of wasted water going down the drain. With the D'Mand pump, the wait time is cut in three (about 40 seconds) and the water is recirculated (i.e. no waste). Even better, you can call for hot water as you enter the room and it is available soon after. The pump uses little power, is fairly silent and works well. However, I had a few issues when i first installed it.
1. Some debris caused the valve to stay open and it caused all kinds of funny things (like hot water in the cold and in the toilet as well as constant cycling of hot water by gravity). Once the debris was flushed out, these problems went away.
2. I had to adjust the temperature setting higher. You need to contact the company for instructions on how to do this (tech support was helpful) or search on the Internet.
I also installed additional shut-off valves to isolate the pump in case of problems, maintenance or if I am away.
All in all, very happy with the purchase.

Displaying reviews 1-4

Back to top

Q&A: Ask the Questions, share answers

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

5 Questions | 6 Answers
Displaying questions 1-5
  • 008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP

    Q:

    DOES THIS PUMP COME WITH A REMOTE TO TURN IT ON FROM A SECOND LOCATION?
    Asked on 3/4/2012 by Anonymous

    2 answers

    • VERIFIED BUYER

      A:

      There is one available that you can purchase separately, but this kit does not contain the remote for a second location.

      Answered on 5/15/2012 by Joe the Handyman from Apex, North Carolina
    • CUSTOMER CARE

      A:

      No, the remote control must be purchased separately (part 554-1).

      Answered on 3/23/2012 by PexSupply Staff from NY
  • 008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP

    Q:

    Just what is "Male NPT" referring to?
    Asked on 2/11/2012 by Anonymous from Gloucester County, VA

    1 answer

    • CUSTOMER CARE

      A:

      Male NPT refers to the connections on the 008 circulator itself. It has male threaded connections instead of the more typical flanged-style of connection.

      Answered on 2/13/2012 by PexSupply Staff from NY
  • 008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP

    Q:

    How many wireless motions can be on one system?

    Can you have wired starter button and motions on same system?
    Asked on 5/9/2011 by Anonymous from Mass.

    1 answer

    • CUSTOMER CARE

      A:

      There can be up to 2 motion sensors.

      Answered on 5/9/2011 by PexSupply Staff from NY
  • 008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP

    Q:

    it this work on tankless heater?
    Asked on 1/27/2011 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      You will need to check your tankless heater to see whether you can use a recirculation system with it.

      Answered on 1/31/2011 by PexSupply Staff from NY
  • 008-DM-PK Male NPT, 008 Pump w/ plumbing kit, 1/25 HP

    Q:

    If installed under kitchen sink, do I need another system in bathrooms?
    Asked on 10/25/2010 by bosco from boca raton fL

    1 answer

    • CUSTOMER CARE

      A:

      You will only need to install one, however you want to locate it in the kitchen or bath that is farthest away from your water heater.

      Answered on 10/28/2010 by PexSupply Staff from NY
Displaying questions 1-5

Do you have a question about this product? 

PexSupply.com Logo

Join Our Mailing List - Sign up and receive special offers and coupons

Nextag Seller PriceGrabber User Ratings for Pex Supply PHCC BBB Reliability Seal
HACKER SAFE certified sites prevent over 99.9% of hacker crime. Facebook Twitter Youtube