Zoom

T-M32 Takagi Tankless Water Heater (Natural Gas)

SKU:T-M32-NG

Brand: Takagi

T-M32 Takagi Tankless Water Heater (Natural Gas)
Qty	Price
	$1,589.00 / each

Add to Cart for Discount

In Stock! Ships in 24-48 Hours

3 Available

Specs

Product Specs
Application:	2-3 Showers
Product Type:	Tankless Heater
Fuel Type:	Natural Gas (NG)
BTU Range:	24000 to 240000 BTU
Amperage: ? Amperage close Amperage, or amps, refers to the amount of electricity flowing through the wires.	0.94
Voltage: ? Voltage close Voltage, or volts, is a measurement of the difference between two electric fields (in heating terms, the difference between the Earth's electrical field and the electricity running through your wires).	120v
Gas Pressure (Min):	5" W.C.
Gas Pressure (Max):	10.5" W.C.
Water Connection:	3/4"
Gas Connection:	3/4"
Vent Size:	4"
Vent Type:	Category III Stainless Steel
Flow Rate: ? Flow Rate close Flow rate describes the speed in which an amount of fluid can pass through.	0.5 - 9 GPM
Max PSI: ? Max PSI close Max PSI is the maximum amount of pressure per square inch that can be tolerated.	150 psi
Height:	23.5"
Width:	18.5"
Depth:	8.9"
Weight:	56 lbs
Temperature Range (F):	113°F to 167°F
First Hour Rating:	300 gal/hour
Water Pressure:	15 psi to 150 psi
Outlet Water Temp:	100°F to 185°F
Energy Factor:	0.82

Description for Takagi T-M32-NG

The T-M32 is a fully modulating, gas-fired, tankless on-demand water heater specifically designed for heavy-duty commercial applications. The T-M32 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. It can be installed either outdoors, indoors, or direct-vented. It can supply to domestic hot water systems or to heating applications (local codes dictate proper compliance). Features HRS35 Copper alloy and a thicker heat exchanger drum for added durability. Multiple units can be combined in a system of water heaters to provide for larger applications such as hotels, large restaurants, apartment complexes, etc. The T-M32 is also backwards compatible with the T-M1 model, making any additions or replacements to current T-M1 systems easy and simple. Please check with all local codes prior to installation.

Features:

240,000 BTU/U, up to 9 GPM (Max)
The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit.
Easy-link capability up to 4 units. You may connect up to 20 units and generate over 180 GPM using a multi-controller unit.
Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and harder than the standard copper, making it much more resilient against erosion and leaks.
Offers precise control of the water valves.
8 new dipswitch temperature settings: 100 F, 115 F, 120 F, 135 F, 145 F, 155 F, 165 F, and 185 F. These temperatures are better suited for commercial applications.
7-segment LED for error codes: Remote controller is not required to pinpoint problems.
Ignition indicators: indicates which burner is fired up at the moment.
Utilizes the air-fuel ratio rod for added safety.
The drum thickness has been increased 25% for greater heat exchanger performance and to be more resistant to thermal stress.
Increase in fin pitch: Fins are more "spread out" which improves the durability of the heat exchanger. More space in-between the fins reduces build-up. Higher temperatures at the top of heat exchanger reduces condensation.