Ball Valves, Gate Valves, Vacuum Breakers, Check Valves, Sillcocks, and Boiler Drains.
1/2" to 4" threaded and solder end swing check valves.
View Details »
Full Port Ball Valves. Forged Brass, 1/4" - 2" 400 PSI W.O.G. , 2-1/2" - 4" 600… PSI W.O.G., 150 PSI Saturated Steam, Chrome Plated Ball, Yellow Plastic Sleeve, Blow Out Proof Stem. Available in threaded ends and solder ends.
View Details »
1/2" to 4" threaded and solder end gate valves at competitive prices.
View Details »
Frost Free Sillcocks - Frost Proof Sillcocks - Plumbing Valves
View Details »
Taco created the Taco WAGS valve to protect consumers from a common problem: flo…oding and damage caused by a water heater failure. It happens some 5.5 million times every year. Every water heater fails, most within 7 to 10 years. And because water continues to be supplied, a leaking water heater can pour hundreds or thousands of gallons of water into the home.
View Details »
BII Sillcocks, For cold Water Applications only, Maximum operating temperature =… 180 degrees F, CSA Approved, Pressure Rating up to 150psi
View Details »
Boiler Drains which are often referred to as Drain Cocks, come in 1/2" and 3/4" …sizes.
View Details »
Series 150A Watts Water Hammer Arrestors are used in residential applications to… control water pressure shock and prevent water hammer conditions. It consists of a pre-charged air chamber that is rechargeable, an air-tight sealing cap, standard tire valve connection for easy charging, stainless steel top, sealed-in diaphragm, lower stainless steel chamber, and brass hex adapter for easy installation. It can be installed in new or existing plumbing systems in any angle. Series Watts 150A is ideal for dishwashers, clothes washers, and quick-closing faucets. Model 150A-HA water hammer arrestor with 3/4 in. hose thread for washing machines and Model 150-HA is just 3/4 in. fitting. Maximum Working Pressure: 150psi (10.3 bar), Maximum Shock Pressure: 200psi (13.8 bar), Maximum Velocity: 10 F.P.S.
View Details »
Series 2-M2 Duo-Cloz Manual Washing Machine Shutoff Valves are used in washing m…achine applications to manually control water flow and pressure from the hot and cold water supply piping to the flexible hoses feeding a washing machine. It prevents the washing machine hoses from bursting preventing water damage in the home.
View Details »
Sloan Royal and Sloan Regal flush valves come in many different types and models…. With the Dual Filtered By-Pass, along with other exclusive features such as the triple seal handle, the high back pressure vacuum breaker, and the new vandal resistant stop cap reaffirms the Royal Sloan Valve as the true leader in Flushometer (flush valve) design. If you don't see a Sloan flush valve you are looking for simply give us a call and we'll find it for you.
View Details »
Supply Stops & Risers
View Details »
Series N36 Watts Water Service Vacuum Relief Valves are used in water heater/tan…k applications to automatically allow air to enter into the piping system to prevent vacuum conditions that could siphon the water from the system and damage water heater/tank equipment. It consists of a brass body construction with NPT male inlet connection, and a protective cap. Series N36 has a low profile design, is tested and rated to ANSI Z21.22, and is CSA certified. It is suitable for low pressure steam and water service, and is ideal for use in domestic water heaters and supply tanks, table top heaters, jacketed steam kettles, unit heaters, low pressure steam systems, and steam coil heaters. Maximum Working Pressure: 200psi (14 bar), Maximum Steam Pressure: 15psi (103.4 kPa).
View Details »
Cast Iron and Bronze Wye Strainers, Watts Wye Strainers. Watts model 77 Wye Str…ainters.
View Details »
In-line Spring Loaded Check Valves
View Details »
Gas Ball valves which are also referred to as gas cocks are used for gas or prop…ane lines in residential applications. These Gas ball valves come in 1/2",3/4", and 1" sizes.
View Details »
Watts 3001A Dielectric Unions are used in commercial and residential application…s to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals, and features a female iron pipe thread to solder connection. It consists of a union nut, two tailpieces, and a gasket that separates the tailpieces to prevent an electric current from occurring. Series 3001A is ideal in applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. Maximum Pressure: 250psi.
View Details »