1/2", 24 Port Crimp MANABLOC (9 hot, 15 cold)

Comments about 1/2", 14 Port Crimp MANABLOC (6 hot, 8 cold):

works as it should You hae to write reviews before you have had any time to see if they last over time but I haven't had any problems yet.It's nice to be able to get *lead free products somewhere...You sure can't get them at [@].

Comments about 1/2", 14 Port Crimp MANABLOC (6 hot, 8 cold):

This Manifold is just what i was looking for. good price. although i ordered this to be sent to my home in FL. I then took it to my cabin in TN. and found that it came with all hot and cold fittings to supply the fixtures but did not come with the the 3 - 1" fittings for the main water feed and hot and cold for the water heater. Had to shop around and find some during the 1 week was there (TN.).

Comments about 1/2", 24 Port Crimp MANABLOC (9 hot, 15 cold):

Re-plumbed my entire house with the PEX system and it couldn't be better. Easy to use and quick to connect.

Comments about 1/2", 36 Port Crimp MANABLOC (14 hot, 22 cold):

this is state of the art plumbing at its finest. my only gripe is with the pex crimp style i purchased you cannot do a hybrid of 3/8 and 1/2 so i purchased the 3/8 fittings from another party that being said everything else is awesome and even their 1 800 number was of great assistance to me. i would reccomend this to anyone looking for an alternative to branch and tree style plumbing.

Comments about 1/2", 14 Port Crimp MANABLOC (6 hot, 8 cold):

Works well

Comments about 1/2", 24 Port Crimp MANABLOC (9 hot, 15 cold):

My recently purchased home is 45 years old and we are in the middle of major renovations, including kitchen and bathroom reconfiguration/remodeling. And I do it all myself.Since I needed to rework some of my plumbing I could not think of a better time to switch to a home run water distribution system. After researching online as well as visiting plumbing supply houses and home improvement centers, I settled on the Manabloc 24 port manifold with crimped connections for PEX. It required me to purchase a crimping tool for less than $100 at my local [@] but it has been very straightforward and easy, once I worked through the initial intimdadation factors of the plumbing system itself. I began by simply tying in to the mainline source and adding the manifold to my existing system and then began adding appliances/distribution lines one at a time and removing them from the old lines.My first connection was to my water heater so that I could distribute hot and cold. Even thought this is not new construction, I went ahead and configured the pass through connection to my water heater and returned the hot water to the manifold so that I have full control of my hot water distribution. It also allows me to plan for a future tankless water heater. It went very well so my relative anxiety began to subside. I then connected a newly configured bathroom, hot and cold. It worked like a charm. Then on to the next bathroom and then the kitchen, etc. Each connection became easier and quicker. I still have a couple more to go but I have been very pleased with the overall result and my new ability to control my water distribution from one point of access in a central part of my home and not having to run out to the street to turn off my water everytime I had an issue.Initially, with each new connection, I would simply cut the copper line and cap off the old connection with a Sharkbite end plug just in case I became too intimated and needed to back off. Once I became comfortable, however, I began to remove the old copper plumbing just to clean things up and get it out of my way. I was able to run my PEX lines through my floor joists etc so there are no hanging pipes to contend with. It is now a very clean look and also very easy to understand.Overall, I am very pleased with this design and with the Manabloc product.I am a serial DIYer and this was a great pick for me.

Comments about 1/2", 14 Port Crimp MANABLOC (6 hot, 8 cold):

easy to install, great product, installed in new built cabin, works great.

Comments about Viega 1/2", 30 Port Crimp MANABLOC (12 hot, 18 cold):

I cannot fathom how this is not flying off the shelves at a far faster rate: It is the absolute answer to sourcing any home-run water supply system. All connections are designed for (and necessarily must be at) hand-tightness only, and pipe tapes and dopes are neither needed nor allowed for proper installation. This greatly simplifies and expedites the process of connecting to the Manibloc; valuable features/tips that provide a clear advantage over other manifold systems (which should be advertized, but are not). I experienced zero leaks upon testing and charging the system. The Manibloc is easy to mount, with allowance for multiple mounting techniques both within and without a wall. It is well worth the while--and is more economical--to invest in the Manibloc kit which includes the Manibloc, all fittings for the distribution ports, mounting brackets (for optional mounting between studs), an extra valve key (for a total of two), and everything else otherwise supplied with just the Manibloc. The Manibloc distributes water in the shortest, most intuitive path conceivable, which minimizes frictional pressure loss from source to spigot, and improves temperature and timeliness of your water--both when and wherever you need it. Think MORE: If you anticipate having 15 cold lines and 8 hot lines in your home or business, purchase a Manibloc with at least 18 cold and 12 hot outlet ports to allow for any unforeseeable future expansion. Whichever Manibloc you choose, you'll love yourself for wisely thinking ahead, and you'll greatly enjoy the unparallelled convenience and performance of the Viega Manibloc system.

Comments about 1/2", 14 Port Crimp MANABLOC (6 hot, 8 cold):

Very useful bought to do a remodel made plumbing so simple!

Comments about Viega 3/8", 18 Port Crimp MANABLOC (8 hot, 10 cold):

This thing is great -- got it as well as some half inch adapters and replumbed my whole house in a day. Easy to work with (though the 3/4 pex for the supply lines are not, if you buy it in the coil) Overall, very happy with this