Zoom

Integrated Boiler Control Unit (Includes UT Module 1013-200)

SKU:382-200-448

Brand: Weil Mclain

Integrated Boiler Control Unit (Includes UT Module 1013-200)
Qty	Price
	$164.95 / each

In Stock! Ships in 24-48 Hours

8 Available

Specs

Product Specs
Accessory For:	AHE Boilers
	GV Boilers
	HE II Boilers
Application:	Heating

Description for Weil Mclain 382-200-448

Weil McLain gold module conversion kit, includes UT module 1013-200 - for boilers:

GV
HE II
AHE

Replaces Part #: S9301A1001

Integrated Boiler Control Unit (Includes UT Module 1013-200)

REVIEW SNAPSHOT®

by PowerReviews

Weil MclainIntegrated Boiler Control Unit (Includes UT Module 1013-200)

4.9

(based on 16 reviews)

100%

of respondents would recommend this to a friend.

Pros

Cons

Best Uses

- Primary use:
- Personal (15)

Reviewed by 16 customers

Sort by

Displaying reviews 1-10

Previous | Next »

4/19/2012

5.0

Product worked perfect at first install

By OneManShow

from Staten Island, NY

Pros

Cons

Best Uses

Comments about Integrated Boiler Control Unit (Includes UT Module 1013-200):

The instructions to install the product were simple. It immediately worked when I first installed it. I highly recommend this product.

3/29/2012

5.0

Plug and Play

By Red L Services

from Somerset County, New Jersey

Pros

Cons

Best Uses

Comments about Integrated Boiler Control Unit (Includes UT Module 1013-200):

Had intermitent lockouts on our 17yr old HEII. It would reset by turning it off, and pushing on the connectors for the pressure switch and ignitor. When I pulled the control board, the circut was damaged - probably by moisture. The new Gold conversion board was a direct replacement. 15 minutes and we were back up and running. No problems since.

1/11/2012

5.0

Great Quality

By fourbases

from Galena, il.

Pros

Cons

Best Uses

Comments about Integrated Boiler Control Unit (Includes UT Module 1013-200):

Easy installation.

1/9/2012

5.0

Great Replacement!

By R1100S (BMW M/cycle)

from Saylorsburg, PA

Pros

Cons

Best Uses

Comments about Integrated Boiler Control Unit (Includes UT Module 1013-200):

Slightly different layout appearance, but old wiring receptacles plug right in...takes about 10 minutes to swap the old and new units. I was able to get my old unit to work while waiting for the new control unit by soldering fan motor connections on the board, but wanted the reliability of the new control unit. (New unit arrived in one day after my order... good job, PEX!) My HE II was new in 1992, so I can't really complain about needing to replace this unit.

1/2/2012

5.0

Worked fine easy replacement

By Warmnow

from Waverly, New York

Pros

Cons

Best Uses

Comments about Integrated Boiler Control Unit (Includes UT Module 1013-200):

direct replacment easy and fast to install

12/30/2011

5.0

very easy switch not complicated to do

By dave

from lpool ny

Pros

Cons

Best Uses

Comments about Integrated Boiler Control Unit (Includes UT Module 1013-200):

very easy to install plug and play just had to rewire the circulating pump

12/5/2011

5.0

exactly as specified

By skinny skier

from Spokane, WA

Pros

Cons

Best Uses

Comments about Integrated Boiler Control Unit (Includes UT Module 1013-200):

Installed in minutes and worked perfectly.

11/14/2011

4.0

I'm happy !

By DJLen

from Fort Erie, Ont

Pros

Cons

Best Uses

Comments about Integrated Boiler Control Unit (Includes UT Module 1013-200):

I replaced the old malfunctioning module with this new one and the boiler system is working great. My only disappointment was the product was shipped C.O.D. and I didn't know that before hand or I could have made proper payment arrangements before the product arrived. At the end of the day, all is good.

11/9/2011

(1 of 1 customers found this review helpful)

5.0

Weil-Mclain Boiler Control Module

By Marty

from Michigan

Pros

Cons

Best Uses

Comments about Integrated Boiler Control Unit (Includes UT Module 1013-200):

Controler works great, its a direct replacement for the United Tech unit 1013-100 GV/HEII

11/1/2011

5.0

boiler module

By Leon

from Fort Erie, Ont, Canada

Pros

Cons

Best Uses

Comments about Integrated Boiler Control Unit (Includes UT Module 1013-200):

the product arrived in few days, by UPS. I installed the module and works fine. My only complaint was I wish I knew UPS was looking for cod payment. If I would've knew when ordering, I could have made arrangements to have a check or credit card info available for the driver, otherwise, I would recommend this product and company

Displaying reviews 1-10

Previous | Next »

Q&A: Ask the Questions, share answers

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

5 Questions | 14 Answers

Displaying questions 1-5

Integrated Boiler Control Unit (Includes UT Module 1013-200)
Q:
I have a GV Series 4 and installed control module ut-1013-200
do I need the Molex plug installed to the module?
Asked on 3/13/2012 by Anonymous
Know the answer? Answer this question
6 answers
- VERIFIED BUYER
  
  A:
  If you are using it on a boiler without a power vent damper you would need to install the plug.
  Mike
  Answered on 3/14/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  I am not sure if I can help. The only thing I had trouble with was the
  wires from the igniter did not fit the new board - it seems it needed a
  separate part to connect correctly to the board. I used the connection
  from the old igniter - to connect to the igniter and twisted the other ends
  and inserted into the connections on the new board. (This was the mismatch
  for me) I am not sure what you mean by the Molex Plug?
  Do not know if this helps.
  Answered on 3/14/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  No, but I did go ahead and replace the wiring from the circulator pump to the module that was included.
  Answered on 3/14/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  Only if the end is different on the module then the Cord.
  Answered on 3/14/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  I had the original 1013-100 control module which I replaced with a new 1013-200 module on my Weil McLain GV Series 4 Boiler. The instructions for GV 4 owners that came with the new module said to "discard wire harness assembly with plastic bag attached" referring to the new wire harness that came with the new module. I did this and installed the new module using the old original wire harness (which didn't seem to plug into the new module properly) and the circuit breaker blew.
  So, I wired in the new harness which fit the plugs on the module better but then the Limit Circuit LED on the module flashed constantly. Once I plugged in the new Molex plug (that was in the plastic bag attached to the new harness that the instructions said to discard) everything started working fine. This Molex plug, I guess, is a 47K resistor that plugs into the module circuit board next to a two pole receptacle marked P8.
  Hope this helps...it's not the way the instructions say to do it but it works fine and has for over 4 months now with no troubles.
  Answered on 3/13/2012 by Another PexSupply Customer
- VERIFIED BUYER
  
  A:
  Which is the Molex plug, I simply replaced the old with the new. I can tell you that it will work if you use a separate power supply for the pump.
  Answered on 3/13/2012 by Another PexSupply Customer
Integrated Boiler Control Unit (Includes UT Module 1013-200)
Q:
We installed the boiler control unit to our Weil McLain HE II, and it seems to be running, but the "limit" light is constantly flickering on and off. Is that okay?
Asked on 12/1/2011 by Lisa from Queens, NY
Know the answer? Answer this question
2 answers
- A:
  I had the same problem. Once I plugged in the new Molex plug (that was in the plastic bag attached to the new harness that the instructions said to discard) everything started working fine, no more limit light flickering. This Molex plug, I guess, is a 47K resistor that plugs into the module circuit board next to a two pole receptacle marked P8.
  
  Hope this helps...it's not the way the instructions say to do it but it works fine and has for over 4 months now with no troubles.
  Answered on 3/14/2012 by boilerfan from main street, USA
- A:
  Do you have a higher amp draw circulators such as the B & G 100 or the Taco 110, if so you need to use an isolation relay to avoid damaging the control unit. This could be the cause of the limit light flickering on and off.
  Answered on 12/8/2011 by Anonymous from None
Integrated Boiler Control Unit (Includes UT Module 1013-200)
Q:
Hi,

My Weil Mclain HE II ,natural gas boiler,needs a replacement for its boiler control unit made by United Technologies and has the number 1013-100.Will the above pictured product be the correct replacement ?
Asked on 4/11/2011 by Anonymous from long Island,N.Y.
Know the answer? Answer this question
4 answers
- A:
  I had the original 1013-100 control module which I replaced with a new 1013-200 module on my Weil McLain GV Series 4 Boiler. The instructions for GV 4 owners that came with the new module said to "discard wire harness assembly with plastic bag attached" referring to the new wire harness that came with the new module. I did this and installed the new module using the old original wire harness (which didn't seem to plug into the new module properly) and the circuit breaker blew.
  
  So, I wired in the new harness which fit the plugs on the module better but then the Limit Circuit LED on the module flashed constantly. Once I plugged in the new Molex plug (that was in the plastic bag attached to the new harness that the instructions said to discard) everything started working fine. This Molex plug, I guess, is a 47K resistor that plugs into the module circuit board next to a two pole receptacle marked P8.
  Answered on 3/14/2012 by boilerfan from main street, USA
- CUSTOMER CARE
  
  A:
  According to the manufacturer, 382-200-448 is the correct replacement part.
  Answered on 4/13/2011 by PexSupply Staff from NY
- VERIFIED BUYER
  
  A:
  This will definitely work. I installed one on my Weil Mclain.
  Answered on 7/21/2011 by Stephen the Plumber/Electrician from Ely, MN
- VERIFIED BUYER
  
  A:
  This is most likely a little late for you, but yes it will. I used it to replace the same board.
  Answered on 12/5/2011 by skinny skier from Spokane, WA
Integrated Boiler Control Unit (Includes UT Module 1013-200)
Q:
where is the wire harness
Asked on 3/29/2011 by Anonymous
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  The conversion kit includes a circulator wiring harness and a temperature sensor jumper to allow the new module to be used on older boilers. There are no other wiring harnesses in the kit.
  Answered on 4/4/2011 by PexSupply Staff from NY
Integrated Boiler Control Unit (Includes UT Module 1013-200)
Q:
Can an outdoor reset be attached to this unit?
Asked on 1/1/2011 by Anonymous
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  No, you cannot plug an outdoor reset directly into this unit.
  Answered on 1/19/2011 by PexSupply Staff from NY

Displaying questions 1-5

Do you have a question about this product?

You May Also Want

View Specs

Weil Mclain 511-330-148 - Igniter Replacement Kit for AHE, GV, HE II Boilers

$37.95

View Specs

Product Specifications
Voltage:	24v
Accessory For:	AHE Boilers
Accessory For:	CGa Boilers
Accessory For:	CGi Boilers
Accessory For:	CGs Boilers
Accessory For:	CGT Boilers
Accessory For:	GV Boilers
Accessory For:	HE II Boilers

Weil Mclain 511-842-370 - Control Transformer, 24V

$19.95

View Specs

Specifications
close

Product Specifications
Accessory For: GV Boilers

View Product Detail

Weil Mclain 511-624-520 - Pressure Switch (0 to 5500 ft Elevation)
$32.95
View Specs

Specifications
close

Product Specifications
Accessory For: GV Boilers

View Product Detail

Weil Mclain 590-317-610 - Blower Flange Gasket for GV Boilers
$1.69

Air Eliminators	Nipples
Air Valves	Pipe Insulation
Aquastats & Wells	Pressure Valves
Baseboard Heaters	Pumps & Flanges
Boilers	Radiant Heat
Expansions Tanks	Radiator Valves
Fittings	Relief Valves
Flow Controls Valves	Switching Relays
Flow Switches	Tekmar Controls
Gas Valves	Temperature Controllers
Gauges	Thermocouples
Heating Specialties	Thermostats
Kickspace Heaters	Transformers
Low Water Cutoffs	Water Feeders
Mixing Valves	Zone Valves & Controls

Access Doors	PEX Plumbing
Backflow Preventers	Plumbing Specialties
Chemicals & Compounds	Pumps
Expansion Tanks	Solder
Faucets & Sinks	Stops & Risers
Fittings	Tools
Flush Valves	Toilet Parts
Grease Traps	Tub & Shower Products
Outlet Boxes	Tubular Goods & P-Traps
Nipples	Valves
Pipe Hangers	Water Filters
Pipe Insulation	Water Heaters

Air Cleaners	HVAC Controls
Air Conditioners	Line Sets
AC Install Parts	Mini-Split Air Conditioners
Condensate Pumps	Replacement Parts
Dampers	Registers & Grilles
Dehumidifiers	Replacement Filters
Filter Driers	Thermostats
Flex Duct	Tools
Humidifiers	Ventilation Fans

Project Help

Project Help

Project Help

Forgot Your Password?

Returning Customers – Sign In

Checkout as a Guest

Integrated Boiler Control Unit (Includes UT Module 1013-200)

Returns & Exchanges

Shipping Information

Lowest Price Guarantee

MAP Price

Security 100% Guaranteed

Privacy

CVV Code

Specs

Description for Weil Mclain 382-200-448

Integrated Boiler Control Unit (Includes UT Module 1013-200)

Q&A: Ask the Questions, share answers

You May Also Want

Specifications

Specifications

Specifications

Specifications

Product Zoom

Video

Join Our Mailing List - Sign up and receive special offers and coupons