1" Wilkins 975XL Reduced Pressure Principle Assembly Zoom

1" Wilkins 975XL Reduced Pressure Principle Assembly

SKU:1-975XL

Brand: Zurn

Zurn
Qty Price
$185.95
/ each
In Stock! Ships in 24-48 Hours
8 Available

Specs

Size: 1"
Hydrostatic Test Pressure: 350 PSI
Weight: 14 lbs
Max PSI:
?
175
Water Temperature: 180°F
Material: Bronze
Application: Plumbing

Description for Zurn 1-975XL

Application

This reduced pressure principle assembly is designed for installation on potable water lines to protect against both back-siphonage and back-pressure of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists

Standards Compliance

  • ASSE® Listed 1013
  • IAPMO® Listed
  • UL® Classified (less shut-off valves or with OS&Y valves)
  • C-UL® Classified
  • CSA® Certified
  • AWWA Compliant C511
  • Approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California
  • NYC MEA 425-89-M VOL 3

Materials
  • Main valve body: Cast Bronze ASTM B 584
  • Access covers: Cast Bronze ASTM B 584
  • Fasteners: Stainless Steel, 300 Series
  • Elastomers: Silicone (FDA Approved), Buna Nitrile (FDA Approved)
  • Polymers: Noryl, NSF Listed
  • Springs: Stainless steel, 300 series

1" Wilkins 975XL Reduced Pressure Principle Assembly

REVIEW SNAPSHOT®

by PowerReviews
Zurn1-1/2" Wilkins 975XL Reduced Pressure Principle Assembly
 
5.0

(based on 9 reviews)

Ratings Distribution

  • 5 Stars

     

    (9)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Reviewed by 9 customers

Sort by

Displaying reviews 1-9

Back to top

 
5.0

Works great. Easy to install.

By Steve

from Smyrna, Tn

Verified Buyer

Comments about 1" Wilkins 975XL Reduced Pressure Principle Assembly:

use on my lawn irrigation system

 
5.0

Wilkins 975XL RP Backflow Preventor

By Mike the Irrigation Guy

from Winston-Salem, NC

Verified Buyer

Comments about 1" Wilkins 975XL Reduced Pressure Principle Assembly:

Used these units for my irrigation system and they are performing flawlessly. The size and fit were as described and the installation was simple. I would recommend these units for any irrigation project requiring reduced pressure backflow preventors.

 
5.0

Great value

By Paul

from Charlottesville, VA

Verified Buyer

Comments about 1" Wilkins 975XL Reduced Pressure Principle Assembly:

Delivered on time and product is as described.

 
5.0

Backflow

By The Preacher

from Jacksonville, FL

Verified Buyer

Comments about 1-1/2" Wilkins 975XL Reduced Pressure Principle Assembly:

Installed backflow valve and all is well. Thanks

 
5.0

Great product

By John

from Little Rock, Arkansas

Verified Buyer

Comments about 1" Wilkins 975XL Reduced Pressure Principle Assembly:

Good instructions. [...] Great price. Easy to install.

 
5.0

Great Product, However?

By Matt

from Illiinois

Verified Buyer

Comments about 1" Wilkins 975XL Reduced Pressure Principle Assembly:

I cannot understand the purpose of the shutoffs on both sides of the assembly especially when I have unions on the outside of the each shutoff.

 
5.0

Absolutley Perfect

By NC Glenn

from Raleigh, NC

Verified Buyer

Comments about 1" Wilkins 975XL Reduced Pressure Principle Assembly:

Ordered the part, got it quickly, and it was the exact original manufacturer's part. Replacement was quick and easy with no rerouting of the original lines.

 
5.0

Tremendous Value

By Ed the Merlin

from Ellisville, MO

Verified Buyer

Comments about Zurn 3/4" Wilkins 975XL Reduced Pressure Principle Assembly:

Quality product at a very fair price [...]

(2 of 2 customers found this review helpful)

 
5.0

Excellent Part, Excellent Price

By Mr. W

from El Paso, TX

Verified Buyer

Comments about 1-1/2" Wilkins 975XL Reduced Pressure Principle Assembly:

Was replacing an old backflow, used this one, and went together flawlessly. The best part was the price from PexSupply as it was the best value on the internet, as well as all of the other parts I ordered.

Displaying reviews 1-9

Back to top

Q&A: Ask the Questions, share answers

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

6 Questions | 7 Answers
Displaying questions 1-6
  • 2" Wilkins 975XL Reduced Pressure Principle Assembly

    Q:

    I'm in California. Does this comply with the new lead free rule?
    Asked on 5/3/2012 by Mike from Ca

    2 answers

    • CUSTOMER CARE

      A:

      This model is not lead-free. Use 975XL2 models for lead-free installations.

      Answered on 5/4/2012 by PexSupply Staff from NY
    • VERIFIED BUYER

      A:

      Not sure if this has to do with the content of lead, but this product
      states on it that it is not for use in California.

      Answered on 5/4/2012 by Another PexSupply Customer
  • Zurn 3/4" Wilkins 975XL Reduced Pressure Principle Assembly

    Q:

    I have a small drip/discharge from the "vent" area at the bottom of my backflow valve. How does one flush the valve out?
    Asked on 4/28/2011 by Anonymous

    1 answer

  • 1" Wilkins 975XL Reduced Pressure Principle Assembly

    Q:

    Can this replace Febco 285Y 1" without modifications on existing plumbing?
    Asked on 4/11/2011 by Niki

    1 answer

    • CUSTOMER CARE

      A:

      According to the manufacturer, the 1-975XL is 13" in length and the Febco 285Y is 12 3/4" in length. Therefore, some field adjustments may be required.

      Answered on 4/12/2011 by PexSupply Staff from NY
  • 2" Wilkins 975XL Reduced Pressure Principle Assembly

    Q:

    Do you have locking kits to prevent unauthorized opening or closing of isolation valves on the 2-975XL?
    Asked on 10/15/2010 by Anonymous

    1 answer

  • Zurn 3/4" Wilkins 975XL Reduced Pressure Principle Assembly

    Q:

    If the 975 XL is discharging on a consistent basis would it just need to be rebuilt or would it be another issue with the buildings plumbing.?
    Asked on 10/11/2010 by cal

    1 answer

    • CUSTOMER CARE

      A:

      It is suggested that the unit be flushed out because any sort of sediment lodged into the assembly can cause discharge.

      Answered on 10/19/2010 by PexSupply Staff from NY
  • Zurn 3/4" Wilkins 975XL Reduced Pressure Principle Assembly

    Q:

    how would I increase the output pressure on this product?
    Asked on 9/19/2010 by Michael homeowner from Kissimmee, FL

    1 answer

    • CUSTOMER CARE

      A:

      No, the max pressure rating on this part is 175 PSI. There is no way to increase the output pressure.

      Answered on 9/23/2010 by PexSupply Staff from NY
Displaying questions 1-6

Do you have a question about this product? 

PexSupply.com Logo

Join Our Mailing List - Sign up and receive special offers and coupons

Nextag Seller PriceGrabber User Ratings for Pex Supply PHCC BBB Reliability Seal
HACKER SAFE certified sites prevent over 99.9% of hacker crime. Facebook Twitter Youtube