- PEX Products
- Heating Supplies
- Plumbing Supplies
- HVAC - Air Conditioning
- Fittings & Valves
-
Shop By Brand
Radiant Heat Panels
Radiant Heat Panels will improve the efficiency of a radiant heat system. These panels include Wirsbo Quik Trak which can be used above a subfloor, and Wirsbo Joist Trak which should be placed in between the joists below the space to be heated.
More About Radiant Heat Panels
Radiant heat is growing in popularity, and is now the preferred heating system in new homes. Radiant heat provides more comfort throughout the home than standard baseboard heat. PEX tubing is installed beneath the floor and heats the home from the ground up. As the floor becomes warm, the room is heated evenly and efficiently. Radiant heat is silent, producing no creaking, banging, or humming sounds, such as those commonly heard in other heating systems. Radiant heat allows the thermostat to be set a few degrees lower than it would normally be set, while still providing the same warmth. This cuts energy bills and saves you money.
Joist Trak Panels
Uponor (Wirsbo) Joist Trak is the best option when an existing floor is in place, but access to the joist spaces beneath them is still available. Joist Trak panels are made of a thick aluminum alloy which is great for heat transfer. These aluminum panels contain 1/2" grooves that allow 1/2" PEX tubing to be installed firmly into place. Joist Trak panels heat up as hot water passes through the PEX tubing. The aluminum panels are installed securely in joist spaces beneath the wood subfloor and transfer heat to the floor above. To determine the amount of Joist Trak and PEX Tubing needed for your project use the Joist Trak Calculator.
Ultra-Fin
Ultra-Fin radiant panels are aluminum plates similar to Joist Trak panels. They are also installed in joist spaces beneath the wood subfloor and transfer heat to the floor above. Ultra-Fin panels are not installed directly to the joists. Instead, they are hung 2" beneath the wood subfloor which creates convection. 1/2" PEX tubing is used with Ultra-Fin panels.
Quik Trak
Uponor (Wirsbo) Quik Trak is best when a foundation is present and you can raise your floors by 1/2" but not 2". Quik Trak panels are wooden panels that contain an aluminum heat transfer plate on one side, and grooves that allow 5/16" PEX tubing to be installed firmly into place on the opposite side. Similar to a Joist Trak panel, a Quik Trak transfer plate heats up as hot water passes through the PEX tubing. These unique panels are available in straight runs or return bends to create loops. They can easily be cut or combined to fit the size and shape of any room.
Viega Snap Panels
Viega Snap Panels are a polystyrene grid fastening system used in concrete slab applications. These unique panels contain grooves which allow 1/2" ViegaPEX barrier tubing to securely be installed in straight or diagonal directions. Viega Snap Panels do not have an R-Value and should be used in combination with insulation containing an R-Value of 5 or better. Snap Panels can be cut with a utility knife to custom fit to any installation.
Join Our Mailing List - Sign up and receive special offers and coupons
