Enter your e-mail address below to have your password reset. You will receive an e-mail with a new temporary password in it.
Your new password is on its way. If you have problems accessing your account, please contact us at 1-888-757-4774 and we'll help you out.
I'm sorry, your e-mail was not found in our system.
If you think this is a mistake, please contact customer service at 1-888-757-4774 or via e-mail here.
Sign in to access your account and complete your order.
You will have the option to create an account on the order confirmation page.
PEX Tubing is widely used to replace copper in plumbing applications. Typically, red PEX tubing is used for hot water while blue PEX tubing is used for cold water.
PEX Tubing is the fastest growing trend in the plumbing industry. Instead of copper pipes that are expensive to purchase, expensive to install, and require rigid corners and complicated connections, PEX Tubing is flexible, inexpensive, and easy to install. If you aren't sure which PEX Tubing is right for you, read through the FAQs or view some of the comparison charts to see the different attributes of each kind of PEX.
Our experts are always available M-F 8:30-5 at 1-888-757-4774
There are now over twenty different brands of PEX tubing for plumbing available in the US today. The main distinguishing characteristic that separates one brand of PEX from another is whether it is PEX-a, PEX-b, or PEX-c. PEX-a is the highest quality tubing available on the market today. PEX-a is the most freeze- and kink-resistant, and it is also the most flexible. AquaPEX tubing is the only PEX-a tubing available for plumbing systems, and is the only tubing that can be used with the ProPEX expander system. The other major manufacturers such as Watts, Viega, and HydroPEX are PEX-b products. These are still good products and will work well for plumbing applications. All of the PEX tubing products sold on PexSupply.com have at least a 20 year warranty.
The different colors of PEX are used to signify hot and cold lines in a plumbing system. Red is generally used for hot lines, and blue is used for cold lines. White PEX tubing is used as well for either hot or cold lines. The only difference between the tubing is the color; otherwise it is exactly the same in terms of material, quality, and price.
1/2" PEX is the most common size tubing used to run to faucets and fixtures. 1/2" PEX has a greater flow rate than 1/2" copper, which has been traditionally used to run to faucets and fixtures. Therefore, 3/8" tubing may also be used to achieve a similar flow rate for replacing 1/2" copper. For products that require a large flow rate, larger tubing may be required.
The main fitting systems such as crimp and expander offer special fittings to connect directly to your faucets and toilets. The faucet connector goes directly from PEX to a 1/2" faucet connection. The toilet connector connects 1/2" PEX to a 7/8" toilet connection.
As the chart available in this help section illustrates, all types of tubing may be used with the crimp, clamp, press, or compression fitting systems. However, only AquaPEX can be used with the Wirsbo Expander System.
This table will show you which PEX tubing, fittings, and manifolds are compatible.
*Minimum bend radius equals 6-times the outside diameter
10 products shown
There is a Minimum Advertised Price (MAP) allowed by the manufacturer on this product. Add item to cart for lowest price.
$26.95 / each
$77.85 / box
3 x $25.95
$34.95 / each
$167.75 / box
5 x $33.55
$34.45 / each
$165.25 / box
5 x $33.05
$227.95 / each
$437.90 / box
2 x $218.95
PEX (cross-linked polyethylene) tubing is an alternative to traditional copper pipe in plumbing applications. PEX tubing is available in three standard colors: red, blue, and white. PEX is color coded to distinguish hot and cold lines from a supply line when looking at a manifold. Red PEX tubing identifies the hot water line, while blue PEX tubing is used for cold water. Red and blue PEX have identical physical properties except the color that differentiates them. The most common size used in PEX plumbing applications is 1/2", however sizes are available from 1/4" to 3".
PEX tubing for plumbing applications does not require the oxygen barrier commonly found in PEX used in heating applications. Since there is a constant supply of fresh water from a water main, oxygen molecules will always be present in the system. Therefore, there is no need for the oxygen barrier.
Pre-sleeved Uponor (Wirsbo) AquaPEX tubing is used in hot and cold water distribution systems for outdoor installations. The high-density polyethylene (HDPE) ridged sleeve provides protection for installations in concrete or soil. Easy removal and replacement of the tubing is made possible with this additional sleeve.
Pre-Insulated AquaPEX Tubing can be used in either residential or commercial plumbing applications. 1/2" PEX-foam insulation provides a flexible, durable, corrosion-resistant option for insulating potable-water lines.
PexSupply.com offers several types of non-barrier PEX including Rifeng, Uponor (Wirsbo) AquaPEX, ViegaPEX, and SharkBiteTubing.
Subscribe to our Channel
Like Us on Facebook
Visit Our Blog
At PexSupply.com, our goal is to bring you the highest quality plumbing, heating and HVAC supplies at competitive prices. Our product catalog includes PEX Plumbing Supplies, Radiant Heat Supplies, VisionPro Honeywell Thermostats, Taco pumps and mini-split air conditioners. If there are items you are looking for but can't find on our website, please contact our Customer Service Representatives & we will do our best to find what you need.
© 2013 PexSupply.com